Brake identification

[EvilEmpire]

Hi Folks - finally got around to pull front wheels off in prep to drop the front subframe to clean and repair. I found that I have vented disk rotors - but I don't understand what I have here - looks like the stock hub? with some vented rotor and ATE 4 piston caliper that looks like it sits properly on the rotor. Now it's all rusted trash and needs to be replaced but I don't know what I have here. I've searched through many of the brake upgrade threads but haven't seen this combo for a regular 2002. Any help appreciated.

[AceAndrew]

Turbo brakes.

 

You could rebuild the calipers, slap on new rotors (W&N)/pads/bearings and you'd have a nice little setup.

Edited June 27, 2017 by AceAndrew

[halboyles]

PM sent.

[EvilEmpire]

Thanks AA and Halboyles  

Does that mean I have the Tii Struts to fit that hub and rotor?

[ray_]

I'm 99% certain the answer is yes, to that.

 

Spacing is different on the caliper mount ears. There's pics somewhere on the faq comparing.

 

Cheers,

[halboyles]

1 hour ago, EvilEmpire said:

s  

Does that mean I have the Tii Struts to fit that hub and rotor

Yes, ti/tii/Turbo struts were all the same 3.5" between the caliper mount bolt holes.  The Turbo hub is different however as it has a deeper offset and will only work with the Turbo rotors.