Work in progress

[rgiles675]

I've been working on my 75. Ended up Cutting out some of the floor as well as removed the stock seat brackets and welded in new rails for racing seats. I also raptor lined the inside

Sent from my iPhone using Tapatalk

[ingramlee]

Cannot see photos. You must be using Tapatalk. 

[Toastedtii]

Are there not replacement floor pans for the rear available or is this just a track car?

[rgiles675]

Are there not replacement floor pans for the rear available or is this just a track car?

Just making a fun track/bomb around ride. I could probably pick up floor pans but this works too


Sent from my iPhone using Tapatalk

[vacca rabite]

There are floor pans for the back and front available.

But.  Race car.

 

Curious, are the floors just screwed down or are they bonded as well.  The floors do add stiffness and strength to the car, and I'm not sure if sheet metal screws alone would allow that to still be the case.

 

Zach

[rgiles675]

There are floor pans for the back and front available.
But.  Race car.
 
Curious, are the floors just screwed down or are they bonded as well.  The floors do add stiffness and strength to the car, and I'm not sure if sheet metal screws alone would allow that to still be the case.
 
Zach

Zack I bonded them and also used screws..It's not perfect by all means but it will do the job!


Sent from my iPhone using Tapatalk

[Colin]

That's how I did my Recaro SRDs.  It gives you a very solid base and stiffens up the body a bit.