forced induction Megasquirt Turbo Msq File Sharing

[burndog]

Is there a place on this forum that we could share our Megasquirt MAP files?  I tried the DIYEFI site and forum, but none of them are really suited for our turbo / EFI / Megasquirt configurations.  If any of you have a MS / EFI / Turbo M10 would you mind sharing your project files?

 

I have the car idling well and running very strong at boost with no pinging, but at low RPM's it is running real rich.  So, I have no idea if what I am doing is in the right direction or in the direction of detonation!  I would love to look at your project files and compare my fuel, timing and ignition setup and curves.

 

Thoughts?

 

BURNDOG

 

 

 

[mikebontoft]

Possibly a stupid question, but do you have a wideband installed and what version of MS are you using?

[burndog]

yes, wideband ODB and currently MS3.  The car orignially had MS2Extra code, but lost tune file when flashing ECU with newest firmware (Lame Newbie Action).  It is what it is and I have it running pretty damn good, but I know all of my MAP's need fine tuning.

 

BURNDOG

[bmwflying]

I have a ms3x file ~15psi 275hp 680cc injectors running a little to rich at cruise (12.5-13) but driveable.  You can email me at bmwflying@gmail.com ill send it over.