tires and wheels Tire Conversion/old Custom Wheels

[vwspeed03]

so i got some 15x9" wheels (rear) and 15x8 (front) does anyone know the lug length I would need (from factory lugs) adding a 1" spacer in the front & .5" spacer in the rear? also are these threaded or press in ? Im going into clutch master cylinder panic mode.  I think I just need to take a breath and rip it apart. Is it hard?

 

Thanks every one for everything. Ill get some pics so all of the panic....ers like me can have some 2002 motivation!

[vwspeed03]

I would delete the last post if I could.. Fronts are 15x8 w/ 25et (offset) rears are 15x9 w/ 15et. correct me if Im wrong but If I got some 25mm spacers for the front and 15mm spacers for the rear that should make my offset 0. I would then need to get some +25 and +15mm lugs. right? 

 

are the lugs measured in total length or are they from the knurling or thread? 

 

Happy Sunday!

[steve k.]

Contact Ireland Engineering. They have long press in ARP studs. Have had those on the car for a while. Work well, tack weld them after pressing them in.

Steve k.