Anyone use this Specialty Products 83115 Rear Camber Kit?

[gastephens]

Yeah I know it says Datsun but the application guide says it will fit a 2002 also.

Specialty Product 83115

Instructions

My understanding of how it works:

You cut big circles in one of the rear control arm mounting tabs. The hexagons sit in those circles and rotate to allow you to change bolt angle. Then you lock it down with the cam-shaped gizmo and the sheet metal screw.

It seems like if you moved them so they are offset front to back it would change the toe as well.

[TobyB]

Enlarge the crossmember holes to 1 1/8” with

the 73010 hole punch.

!!!

!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

...no....

t

[gastephens]

I don't think there is enough room to make 1.125" holes in the mounting tabs. It appears you agree with me.

[TobyB]

Gawd, no- the tabs are already weak, and

can't be more than about 30mm...

That said, with some work, it might actually be a decent setup.

You'd need to do more fab than they say, though!

heh

t

[gastephens]

Yeah, at that point I might as well buy the Ireland kit and weld on new tabs.