Jump to content

njmolinelli

Solex
 View Profile  See their activity

  • Posts

    28

  • Joined

  • Last visited

  • Days Won

    1

  • Feedback

    0%

 Content Type 

Everything posted by njmolinelli

  1. njmolinelli
    Yea 3 and 4 were covered in gas, carb is tight, looks clean nothing is loose, has 32/36 web, all stock, all had low compression, plugs 1-2 were dry, all were replaced a few months ago, it does have high mileage, but before this it ran good, good compression, msd ignition
  2. njmolinelli
    I was driving my 75, and all of a sudden it started sputtering and running really rough, lost all power, got back to my shop and pulled spark plugs, back 2 were wet had fuel all over them, had really low compression, what would cause this? Blown head? Has this happened to any one? I haven’t torn into the motor yet.
  3. njmolinelli
    Let me rephrase that, 3-4 months lol hahaha
  4. njmolinelli
    True! I guess it also gives me the chance to work on it and learn the engine, plus add a couple Extra upgrades, gives me something to do for a month or 2,
  5. njmolinelli
    Well I’m going to pull it anyways to do a 5spd, new clutch, put on the exhaust manifold I have, so might as well just give her a rebuild while it’s out, fix the leaks(no more burning oil smell in the cab) lol I was thinking just a 284 cam new pistons with my 32-36 Webber should be plenty plus 5 spd, ... its doesn’t really smoke that bad, maybe down shifting hard it might but other than that
  6. njmolinelli
    Yes I have, quiet a bit, just wanted to put a new post, get the mind going and thinking!! Get everyone one talking and opinions !!
  7. njmolinelli
    Yes he is! 12 years old and going strong! He drive the car quiet a bit too, when I get tired, super smart dog!
  8. njmolinelli
    Hi everyone! I am looking to rebuild my engine, I have a stock engine with 32-36 Webber and a tii exhaust manifold, what are some mostly stock rebuild mods, I am going to get new pistons, new cam, I do not mind having a mostly stock build, what recommendations for a cam, piston..... any ideas much appreciated! Engine has about 250k-300 since last rebuild! Engine still runs great! I am going to pull it out and do all the seals, so might as well give her a face lift! Plus 5spd!!
  9. njmolinelli
    Wooooo!!! Oooh have so much to do, such little time ha!! Procrastination !!!
  10. njmolinelli
  11. njmolinelli
    Buy carpet kit then cut your own boards
  12. njmolinelli
    Yea I think I found it burning oil on the exhaust manifold I’ll have to pressure wash it off see where it’s coming from .... but pretty oily under the manifold ...
  13. njmolinelli
    No lie it’s nrvrt done that I had new exhaust put on I’ll look there
  14. njmolinelli
    I down shifted at good rpm to 3rd and smelled bad and cab filled with little bit of smoke hmmm...
  15. njmolinelli
    I down shifted at good rpm to 3rd and smelled bad and cab filled with little bit of smoke hmmm...
  16. njmolinelli
    Me too I’ll walk the extra fifty feet to avoid that lol
  17. njmolinelli
    I only drilled a hole in each shock to release the pressure of it.. then just pushed it in
  18. njmolinelli
    Basically ya drawing attention fir having long hair or just sweet car
  19. njmolinelli
    Sucked in the front bumpers too !! Looks way better
  20. njmolinelli
    New wheel
  21. njmolinelli
    Yea panel isn’t To bad at all shouldn’t be to bad one body shop wouldn’t even fix it to old and European lol
  22. njmolinelli
    Well poor girl got backed up into.... on the other hand guess it’s time to strip her down for some nice new Verona red paint.... oh ya and she just also got a new carb!!!
  23. njmolinelli
    Ok I’ll take a light burl
  24. njmolinelli
    Light burl?
  25. njmolinelli
    7x15 et25 bbs wheels
×
×
  • Create New...