Inka’d02

Howdy!

Nice hood that was been in dry storage. There is some surface rust on the underside and there was a small portion of the hem that had rust. I opened that area up cleaned, pasivated and primed. A little body seal there and you are good to go. I prefer local pick up but will ship. Please do not ask me to quote shipping, it's roughly 55 x 55x 6 inches and weighs roughly 50 lbs. You can call greyhound for pricing.

450 OBO

Thanks! 

Andy

bump with update

11 hours ago, Coastalcrush408 said:

Can you take photos of the date stamps? 

Runners are a mix of 74 and 73, Lower and upper intake are 73 and pump is 71

Clean, looks to have been bead blasted.

Top of Ad, 390+shipping

Howdy, 

The majority of the parts need for a tii induction system. The parts were removed from a running car however that was 15+ years ago. In intake plenum does not have injectors.

UPDATE: Found pump sprocket, upper cover (rough), alt bracket and oil filter housing with high pressure line (see last photo). 

Injection pump, alt tensioner, lower plastic cover and oil filter housing sold. Price reduced: 250 plus shipping for balance.

Thanks, 
Andy

Howdy,

Rebuilt pedal box. Came with a car I just bought, it looks like it was done a couple of years ago, a couple of nicks in the paint from moving around but looks and feels really nice.

Thanks!

Andy

Sale pending 

Howdy! 

Nice set of BBS alloys. 14 x 6. Need some refinishing but in great shape for their age. One wheel has a small dent but it is only in the lip. All wheels are the same color, lighting is just not as good on one side of the lift.

Thanks,

Andy

Once I get my hands on the car I bought with them I get some photos out .

Thanks for the feedback!

Andy

14 minutes ago, golf73 said:

 

What's the asking price? Come with center caps and nice roundel emblems?

 

 

 

Not sure on price yet

Nice set of Konig Seats, very little wear, photo of one spot where leather has come untucked from underneath the plastic belt pass through. Should be able to be pushed back and glued. Adjustable tilt. Leather

Removed from a 2002 so comes with adapter brackets.

Made in Germany. 

Prefer Pickup as they are heavy.

Thanks, 
Andy

+shipping.

Early rear bumper. Driver quality but not pitted. Has a dent on the passengers side of center section that someone tried to push out.

Howdy,

I have found some posts on these wheels (non turbo) but can't get a good line of what their value. Thoughts on a clean straight set? I may have a set coming my way.

Part number: 36111114231 (ITEM 1 IN PICTURE)

Thanks!

Andy

Howdy!

Looks like problem was a linkage bind on rear carb plus a booster vac leak. We see how the week goes!

Thanks for the input!

Andy

Howdy!

Does anyone have a jetting spec for twin 40mm DCOEs on a stock engine. Runs great on main circuit but having trouble getting it to transition to idle. It will idle at 1500 but any lower and idle falls off and stalls.

Thanks!

Andy

Bump, carbs and manifold still available.

21 hours ago, jfahuna said:

Have  a new schrick 336 with springs.

Thanks but that is too much lift for what I am building. GLWS.

Howdy,

Looking for a good used Dr. Schrick 292 camshaft. Really would prefer not to go aftermarket or regrind

Thanks 

Andy

Driveshaft and Complete subframe sold.

Howdy,

Helping a friend sell some 2002 parts:

Rebuilt front subframe, includes struts and control arms. Looks to be all new factory bushings, shocks, strut bearings. All hardware replated. Suspension parts were repainted, not powdercoat. Includes attached steering box-  450 - SOLD

Bare front subframe, clean and repainted- 50 - SOLD

Steering box - 75

Solex carburetors - Look to have been rebuilt but honestly condition is unknown.  75/each ( honestly that's my best guess doing some quick research on value, if I am way off make an offer)

Intake manifold - 45

Drive shaft - make an offer. - SOLD

PM Me if interested. Sorry photos are out of sequence, doing this from my phone.

Thanks!

Andy

bump

bumpers and trim sold

On 9/19/2019 at 10:34 PM, esty said:

not a lot of adhesive is necessary...i only glued the edges at the bottom and around the glove box....unless the dash is really trashed or has mountains on it, smooth is not a requirement...i've installed several and never payed much attention to the naysayers...

 

ask yourself this...would alex trebeck be more handsome bald from chemotherapy or with the wig...

Just fit it as you suggested. Really happy with how it came out.

On 9/19/2019 at 10:34 PM, esty said:

not a lot of adhesive is necessary...i only glued the edges at the bottom and around the glove box....unless the dash is really trashed or has mountains on it, smooth is not a requirement...i've installed several and never payed much attention to the naysayers...

 

ask yourself this...would alex trebeck be more handsome bald from chemotherapy or with the wig...