2 M10 engines for sale

[SCBOB]

I am selling my BMW 2002 engines.

The first one is a complete running motor that is still in my car. I will pull it out after the buyer sees and hears it run.

This motor has about 3k on a full rebuild that included

-Mahle pistons and rings

-New bearings (main/rod)

-New valve springs

-3 angle valve job

-Top End Performance 294 cam

-New timing set

-New oil pump

-New water pump

And the list goes on!

Also I am going to include the following,

-38 Weber (manual choke) and a canon 2bbl manifold that I purchased new about a year ago from Ireland Engineering

-Edelbrock reusable air cleaner with Weber adapter (don’t like the classic square K&N)

-Used but good Top End Header, no leaks/cracks

-Good but noisy 4spd transmission

-Flywheel and clutch that is in the car

The second engine I pulled out of a ’75 that was given to me about ten years ago. The owner left it on my friend’s property and did not want it.

I know it’s good. When I brought it home and gave it fresh gas, it ran better than the car I had been driving for years!

I replaced all the gaskets (except head), and painted the motor due to heavy oxidation.

This is a long block.

I am only selling my engines because I am converting to an M42/5spd combo.

I can email more pictures if you’re interested.

I am located about a mile and a half off highway 1 in Aptos.

I will also let the buyer look through and take what ever they might need out of my spare parts.

Trades I am willing to do= straight across for used DA M42/M44 supercharger kit (it could happen!?), my engines for cash and a good E21 LSD.

I am asking $2150neg

Email: arie1347@sbcglobal.net

more pictures on request.

[esty]

Please do not waste our time.

your 1st post and i don't like your attitude already...

[SCBOB]

Please do not waste our time.

your 1st post and i don't like your attitude already...

I am sorry if my ad offended anyone, this was not my intention. Just looking for someone who could benefit from what I have for sale. As I mentioned in my post the price is neg. I feel this is a reasonable asking price and it is for both motors. I think this site is a great and have found it useful on many occassions.

[kbmb02]

I feel this is a reasonable asking price and it is for both motors. I think this site is a great and have found it useful on many occassions.

Price seems quite fair - if I didn't have already have a garage full of engine parts I'd be on it (cute little toddler you've got there, btw).

If you'd consider selling the air cleaner separately, please email me as I think it'd be a good item for my race car. (And tell me what you're looking for in an LSD - I've got some parts in house to build one.)

-KB

[Mike_B]

Mix one of these engines and John C.'s '69 Neu Klasse, you'll have a sweet ride for not a lot of $'s. Just thinking out loud...

[mybmwtii]

I might be interested in the rebuilt engine.

Will you break this package apart.

If so email me with prices.

thanks,

mike

[mybmwtii]

I might be interested in the rebuilt engine.

Will you break this package apart.

If so email me with prices.

thanks,

mike

[SCBOB]

Mike

Right now I am not interested in breaking up the parts. I would really like to see it all go in a bundle at this time.

Thanks Bob

[SCBOB]

If you'd consider selling the air cleaner separately, please email me as I think it'd be a good item for my race car. (And tell me what you're looking for in an LSD - I've got some parts in house to build one.)

-KB

I am not interested in parting anything out at this time. I picked up the weber adapter plate from redlineweber.com, it basically converts a downdraft weber to a 5 1/4 inch four barrel configuration. The air cleaner is from jegs and I popped off the edelbrock logo fairly easily with no marks left behind. However I did have to modify the adapter plate a little to clear the choke linkage.

Right now i am not sure about an LSD. I have a complete E36 318I that I am going to try and use as many things as possible. I have not been able to start this project due to the fact I was waiting to try and sell my engines and wanted any potential buyer to drive it & hear it run.

I was wondering about your 69 1600. Is this something your actively trying to sell or just putting out there. It is starting to look like I may be looking for a rolling shell in the near future.

Let me know

Bob