Spring Cleaning....

[granth]

3 core metal radiator new re-core on metal tanks $175

Box size: 24x22x6 16 lbs

http://www.brakefade.com/files/FS/bmw_2002_m10_3core_rad_metal.JPG

http://www.brakefade.com/files/FS/bmw_2002_m10_3core_rad_metal_1.JPG

Stock rear subframe clean, sandblasted and primer painted $75

http://www.brakefade.com/files/FS/bmw_2002_rear_subframe.JPG

http://www.brakefade.com/files/FS/bmw_2002_rear_subframe_1.JPG

http://www.brakefade.com/files/FS/bmw_2002_rear_subframe_2.JPG

http://www.brakefade.com/files/FS/bmw_2002_rear_subframe_3.JPG

http://www.brakefade.com/files/FS/bmw_2002_rear_subframe_4.JPG

http://www.brakefade.com/files/FS/bmw_2002_rear_subframe_5.JPG

Late bumpers front and rear $40 each

http://www.brakefade.com/files/FS/bmw_2002_late_bumpers.JPG

Front subframe $40

http://www.brakefade.com/files/FS/bmw_2002_front_subframe_fs.JPG

Front fender set $85

http://www.brakefade.com/files/FS/bmw_2002_front_fender.JPG

Door sheetmetal pas side $75

http://www.brakefade.com/files/FS/bmw_2002_pas_door.JPG

Rear tail light panel $50

http://www.brakefade.com/files/FS/bmw_2002_rear_plate.JPG

Trunk Lid $80

http://www.brakefade.com/files/FS/bmw_2002_trunk_lid.JPG

http://www.brakefade.com/files/FS/bmw_2002_trunk_lid_1.JPG

http://www.brakefade.com/files/FS/bmw_2002_trunk_lid_2.JPG

Hood $150

http://www.brakefade.com/files/FS/bmw_2002_hood.JPG

Rear quarter panel both sides $125

http://www.brakefade.com/files/FS/bmw_2002_rear_quarter_panel.JPG

http://www.brakefade.com/files/FS/bmw_2002_rear_quarter_panel_1.JPG

http://www.brakefade.com/files/FS/bmw_2002_rear_quarter_panel_2.JPG

Complete Roof section $125

http://www.brakefade.com/files/FS/bmw_2002_roof.JPG

http://www.brakefade.com/files/FS/bmw_2002_roof_1.JPG

Various glass from entire car, let me know what you want…

1600 118 head good for rebuild $85

http://www.brakefade.com/files/FS/bmw_1600_118_head.JPG

http://www.brakefade.com/files/FS/bmw_1600_118_head_1.JPG

http://www.brakefade.com/files/FS/bmw_1600_118_head_2.JPG

http://www.brakefade.com/files/FS/bmw_1600_118_head_3.JPG

1600 crank good for rebuild $100

Rod size: 48.07, 48.21mm, 47.99mm, 47.97

Main size: 54.99, 55.25,55.00,55.01,55.05

http://www.brakefade.com/files/FS/bmw_1600_crank.JPG

http://www.brakefade.com/files/FS/bmw_1600_crank_1.JPG

http://www.brakefade.com/files/FS/bmw_1600_crank_2.JPG

Bare M10 2.0l block good core for rebuild $40

http://www.brakefade.com/files/FS/bmw_2002_m10_block.JPG

http://www.brakefade.com/files/FS/bmw_2002_m10_block_1.JPG

Rear after market springs (not sure on mfg maybe) $50

http://www.brakefade.com/files/FS/bmw_2002_springs_orange_rear.JPG

http://www.brakefade.com/files/FS/bmw_2002_springs_blue_rear.JPG

1984 318 AL radiator good condition $50

http://www.brakefade.com/files/FS/bmw_318i_1984_radiator.JPG

http://www.brakefade.com/files/FS/bmw_318i_1984_radiator_1.JPG

http://www.brakefade.com/files/FS/bmw_318i_1984_radiator_2.JPG

320i half shaft's $50

http://www.brakefade.com/files/FS/bmw_2002_320i_cv.JPG

http://www.brakefade.com/files/FS/bmw_2002_320i_half_shaft.JPG

13x6 Mahle BBS wheels clean and sandblasted (Qty 2) $75

http://www.brakefade.com/files/FS/bmw_bbs_mahle_13x6_et13.JPG

http://www.brakefade.com/files/FS/bmw_bbs_mahle_13x6_et13_1.JPG

http://www.brakefade.com/files/FS/bmw_bbs_mahle_13x6_et13_2.JPG

http://www.brakefade.com/files/FS/bmw_bbs_mahle_13x6_et13_3.JPG

Early 2002 steel 13 x 4.5 $20 (qty 1) sandblasted and primer paint

http://www.brakefade.com/files/FS/bmw_2002_13x4_5.JPG

http://www.brakefade.com/files/FS/bmw_2002_13x4_5._1.JPG

http://www.brakefade.com/files/FS/bmw_2002_13x4_5_2.JPG

Rear 1600 backing plate $10

http://www.brakefade.com/files/FS/bmw_1600_rear_backing_plate.JPG.JPG

http://www.brakefade.com/files/FS/bmw_1600_rear_backing_plate_1.JPG

Front bar only 19mm clean and painted $100 http://www.brakefade.com/files/FS/bmw_2002_19mm_front_bar.JPG

http://www.brakefade.com/files/FS/bmw_2002_19mm_front_bar_2.JPG

All items plus ship or local pickup in So Cal (Orange County) or make offer

[boxy02]

Email sent ...Interested in the intake manifold and Yokohamas. I'm local.

Thanks,

[jmayom2002]

do you have a front windshield in very good shape?

jmayom@sbcglobal.net regards