WTB - exterior pedal box throttle lever

[josh72ooh2]

Picture here is for reference. My splines are stripped on my lever.

 

Fwiw, This is for a fuel injection set up. I might have to weld an extra bit of material on it to lengthen the lever. 
 

I’m in Ventura CA. 

[shermanmartinez]

I have several of those pieces available.  If you are on the cheap you can simply remove the part and remove material from one or both sides of the pinch area and it will then create a smaller diameter around the shaft when tightened.

[josh72ooh2]

On 8/24/2023 at 8:42 AM, shermanmartinez said:

I have several of those pieces available.  If you are on the cheap you can simply remove the part and remove material from one or both sides of the pinch area and it will then create a smaller diameter around the shaft when tightened.

I sent you a message. I’d love to buy one of those levers from you.