Jump to content

Recommended Posts

As reassembly of the doors is in the near future, I need to give some attention to the vent window frames.  They are oxidized and the rubber top caps are gone, but I have replacements. 


Were these last items designed to be attached with the frames dismantled, prior to riveting?  If so, I will need to drill out and disassemble.  What size are the rivets in the frame?


After I remove the cloudy anodizing,  the question is do I apply polish only (and re-apply), POR's Glisten, or Powder Coat?  I suspect if I could find a shop doing brite-coat anodizing, it would be very expensive.


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...