FS: M10 Cylinder Heads

[cagedbunny]

Price: $100

Location: Raleigh, NC

Description:

Have a couple spare cylinder heads, both need some work before use.
 

Head # 1 : 121 TI casting, with the larger 46mm intake valves.  Been sitting off a car for more than a decade, needs to be cleaned up and checked over.  Obviously missing the exhaust rocker shaft/arms, but otherwise appears complete.  $125

 

Head # 2 :  E21 casting, was fully “rebuilt” by Bavarian Engine several years ago, but not run long mileage-wise.  Ported and polished intake side by Bav Engine as well.  Fully disassembled, has a seemingly repairable crack between the water jacket and exhaust valve on cylinder 3, pictured below.  Comes with valves, rocker arms, hardware etc.  Pricing for the value of the parts, and the head as a likely fixable but otherwise fit for artwork piece @ $100

 

Located in Raleigh, NC.  

Can pack/ship either or both together.

 

-Adam

Edited November 4, 2020 by cagedbunny

[Regerfab]

PM'ed on the 121 head

[cagedbunny]

121TI head sold.

 

Ported/polished head still available

[cagedbunny]

Ported E21 head still available!

[cagedbunny]

Final call on this ported cylinder head!

[BobBreed]

Did I yell you the story of how I went through 5 heads before I found  a usable one?