Weber manifold question...

[emmodg]

I have a triple set of 40 DCOE's from a 3.0cs (or some M20 variant) - I'm going to build an M10 with them and was wondering if the manifolds would bolt to the M10 head. (I'll just be using 2 of the carbs and manifolds of course.)

[Guest Anonymous]

short answer -- no

but we would probably trade them for new M10 manifolds.

[emmodg]

I'll trade!

[72koop]

Sell or swap the whole set for what you want. You may come out ahead and get exactly what you need.

If they really are a matched set, linkage, and all; my advice is not to break them up. E9.com

[emmodg]

Sell or swap the whole set for what you want. You may come out ahead and get exactly what you need.

If they really are a matched set, linkage, and all; my advice is not to break them up. E9.com

Two are matched. I thought about selling the whole deal but I was gonna sell the manifolds if they didn't work, the other carb and linkage.