M10 Part out, head w/ turbo valves & cam, high comp pist

[gli_ryan]

email: ryankjohnsen@gmail.com

Selling all my m10 stuff. Some parts are cool, some stock. Selling it all. If my prices are whack tell me. I'm just trying to sell this stuff and putting what I think are fair prices, if its not just tell me.

Bav Auto plug wires 1,000 miles $50 shipped

80 degree t-stat 1000 miles $10 shipped

Paeco pistons 10:1 0.040 over bore, all pistons have some scoring & need rings $200

Largely decked head (unknown amount), needs Comectic oversized gasket or nothced pistons and modified timing chain tensioner and adjustable cam gear (I have), Paeco regrind cam likely 272 but unknown, turbo valves $300 shipped

All other accessories B/O

newish water pump $30 shipped

new oil pump $240 shipped

lightly used oil pump $100

I have other stuff as well. Let me know if there is something your looking for that I have not listed. I will be listing DCOE 40's, linkage, manifold, mallory mechanical advance distributor, new crane cams electronic ignition for stock distributor, and stock distributor

[05darkmoon]

Hi how much for the comeplete sidedrafts contact jose @ e

Email joseaguirre31682@yahoo.com

[gli_ryan]

I'm getting all the stuff together currently and going to put up a price soon. It should be up soon and will be posted with the other parts. I'm currently looking for my TWM manifolds….which is part of the current time issue

[PatAllen]

the pistons dont look anything but 9:1 with valve pocket...probalby with the 121 opened up head it makes such high cr ? just wondering...

do you have a picture of the adjustable cam sproket ? i might be interested in this one...

i am interested in the water pump, would you ship to canada ?

[gli_ryan]

According to the receipts the pistons are 10:1, so that is what I'm going off of. But thats not saying you're not correct. Just that when this was put together that is what was ordered. I did forget to put in that the pistons were notched to accommodate the head decking and cam. I'll ship to Canada if you pay all the hidden fees that I may be stuck with.

I'll get a pic of the adjustable cam sprocket, it is not a manufactured part. It was built to deal with the mistake with the head.

[PatAllen]

how long is the pump been not running ?

there is no hidden fees to ship to canada...just jam it in a box and ship with accelerated ground post (NOT ups or fedex), would cost 10$ max...

[gli_ryan]

I pulled the motor last month, put the car away in October.

[Highgrade]

Hi Ryan,

I would be interested in the following:

- New Oil pump

- Rods only not the pistons

PS: I live in Thailand and would pay for the shipping via express mail.

my e-mail: godolphin9@hotmail.com

Thanks

Omar

[Highgrade]

Hi Ryan,

I would be interested in the following:

- New Oil pump

- Rods only not the pistons

PS: I live in Thailand and would pay for the shipping via express mail.

my e-mail: godolphin9@hotmail.com

Thanks

Omar

[gli_ryan]

Can I ship over there easily? And I'm not totally certain I want to split up the rods and pistons yet.

[Highgrade]

Hi Ryan,

Yes you can ship them here with no problem through international express mail, with a good tracking.

In case u don't want to split the rods from the pistons, could you tell me how much would be the cost for the oil pump including shipping?

Thanks.

Omar

[gli_ryan]

where to overthere?

EDIT: emailed

[Highgrade]

Hi Ryan,

Do you still have the new oil pump and is it suitable for an early NK 1800 from 1968?

Just to remind you, I live in Thailand can you ship the part? I will pay for the cost of course.

Thanks

[gli_ryan]

honestly I don't know about specific applications between motor variations.. But as far as I know its for an m10. Where specifically so I can get an appropriate shipping quote?

[Highgrade]

Hi Ryan,

Here is the address in Thailand:

23/3 Moo 1, Vises Road, Rawai, Muang District, Phuket 83100, Thailand

Tel: (66) 7638 0200 | Fax: (66) 7628 9016

and please could you send me some pics i can then check if it will fit my model?

Thanks