S14 oil pan for 2002 from Massive

[Lee]

If only I had the time to finish off my own M2 and terrorize all the modern cars.

200hp on a sub 2000lbs car (1969 shells are so light)...

[M3M3]

leave it to Jim to dredge up that old pic!

yes, i have a big grin!

dang lee, thought you already had your m2 on track. it has been a while since you updated that build.

marshall

[Lee]

Upper oil pan is an old one, therefore the holes on the extension don't line up. Motor is set back by 1.5"

The pan will clear the swaybar in stock location, even in the forward position. In the most rear ward position, the oil pan easily clears the subframe.

Even with the motor set back 1.5", the pan still easily clears the subframe. With a stock M10 pan, you can't really move the motor. Therefore that M2 pan can even work on M10 engines installed in racecars and set back by 1.5" for improved weight balance.

[wickahead]

The list is obviously now closed for the intro price.

Regular price is now in effect, and only three units are available. $850.00usd includes fasteners, rubber flaps and teflon gasket.

01 - Marshall - $200 deposit received

02 - Rey - $200 deposit received

03 - Rey - $200 deposit received

04 - Rey -$200 deposit received

05- Rick74 - $200 deposit received

06 - Julio - $200 deposit received

07 - Jan - $200 deposit received

08 - theirrymartinsgi320 - $200 deposit received

09 - Matze - $200 deposit received

10 - Matze - $200 deposit received

11 - Josh Johnson - $200 deposit received

Want to confirm that there are still a couple left? This is the last info I saw from 1/24/11. If so, please count me in, and upon confirmation of avail, I will send deposit.

Thanks!

//Mark

[Lee]

Yes. There are four units left and I will most likely not make anymore of them. Too costly to produce, too much time consumed.

I am currently loosing a little money on each of the reserved ones at $500.00usd but that was the price announced and I will stick to it. No problem about that.

The four units left will be up for grab. Price will be $850.00cdn + shipping. No deposit will be required. They will all be ready next week, and full payment will be required at shipping time.

Thanks

[Lee]

Good news. Pans will be here this afternoon. I will verify them this weekend to check that every single bore is clean and that no welding will keep the bolts from seating properly. I bought an indexable counterbore bit and will go thru each pan individually. Pans shall be ready to go by Monday or Tuesday (some fasteners are still missing).

Each box will weight 9lbs with protective cardboard. Multiple purchase will still be shipped individually for best protection.

Shipping 4-days by air to the US with $800.00 insurance will be $40.00

$500.00 + $40.00 shipping = $540.0usd

Deposit was $200.00usd

Balance is $340.00usd +4% Paypal fee ($353.60usd) or $340.00usd as "gift".

Paypal addy is massivebrakes@gmail.com

Please right "M2 oil pan" in the payment's header

Lee

[Lee]

Here are a few more shots. Each vertical baffle will need a very small filing at the front. I will let owners take care of it ;-)

PS If you have any question regarding payment, don't hesitate to email me at massivebrakes@gmail.com

[wickahead]

$ sent. Thanks Lee.

//Mark

[M3M3]

ditto!

[M3M3]

when should we be looking for the delivery trucks? ;-)

[rey949]

Payment sent!!

[Lee]

Payment sent!!

Got it. I will also reply to your email later in the afternoon.

Marshall

Rick

Mark

Josh

You have a pan coming your way. I already emailed you a tracking #. Expect 4-5 days delivery. Pans are insured for $900.00

The 8 other pans will be shipped tomorrow.

[M3M3]

[jgerock]

+1

Now on to the welding!

[Lee]

Here's the current status.

Paid in full and shipped on April 14th

Marshall

Rick

Mark

Josh

Paid in ful and shipping on April 15th

Mathias x 2 (Germany)

Rey x 3 (US)

Paid and shipping on Monday

Thierry (Switzerland)

If you have paid in full and don't see your name, please contact me.

So far, only two payments are awaiting.

3 pans are up for grab. Then it's over. You can resell your pan at whatever price you want. You have just witnessed the making of an "instant collector item". ;-)