5 speed mounting bracket, mounts to stock 4spd mounts

[jakeb]

I have been cleaning the garage a little bit and found a few of these left.

This bracket is made to mount a 5 speed trans off the stock 4 speed mounts. You do not need to do any welding or drilling to mount up a 5 speed. I have sold about 40 of these with no issues. I currently have about four(4) of these right now. I have no idea if I will have any in the future. So....get them now if you are thinking about doing the swap.

A lot of people have used my bracket with zero issues. Ask Blunt if you need a reference.

It has some wiggle room each way and a spot for the speedo cable.

They are cut with a water jet out of 1/4" steel. They come unpainted.

The price is $45 each shipped anywhere in the US and $55 shipped anywhere in the world. If you want one either paypal the correct amount to jake AT theguestroom D.O.T net or send me an email. If you have questions also email me at the same email.

Here are a few pictures... If you have any questions feel free to ask.

Thanks, Jake

[s99]

Do you happen to have a mount that will work with the m42 tranny? If so ill buy one.

[mickem02]

Wow...why didn´t you post this two weeks ago...

Nice deal!

//Micke

[jakeb]

Not for use with the m20.... I have one that will work with the m42 engine and m42 trans. I think the angle is different from m20 to m42 tho.

If it is the same then yes I can make you one.