jp5Touring

6 hours ago, Pablo M said:

@jp5Touring did you ever figure out what the issue was? I have the same problem. 
 

sorry to dig up old threads…I’m searching instead of asking new. 

I did the dent/ding on the shaft

Installed a new distributor housing gasket Not a washer to be found when taking it off.

Know wonder it leaked so much.  Installed a 123 Distributor also, still needs a bit of tweaking

to get things correct.   

How do people handle the old condenser wire that goes nowhere now ?

Since we got side tracked a bit.  I have Tim Jason Performance air cleaner.

He will basically make everything to your spec. 

I would check with @BarneyT .   

Thats a nice 2002. Very fair price I think.    GLWS

Couple of hose clamps wouldn't hurt on that short hose after you replace the cloth covered hose. 

2019 had a square tail in black that you could right on with chalk.

Don't recall ever seeing a green one anywhere.

Major major project. Agree 6-7k at best.  Looks to be a home for many a mouse.

He looks to be a hoarder of sorts and this needs everything.🙁

I understand the lost puppy can I bring it home but I would run.

Some cool stuff in his driveway.

This is something I need to do also.   Theres like twenty different Hylomar products.

What  specific one are people using or recommend ?    tia 

I have an AEM AFR that I like very much. Just have it in a gauge pod and tucked in the corner.

It has enough slack in the wires so I can set it up on the dash while trying to tune my DCOE'S.

Appears I need to dust my interior. 🙁

I have that keychain. Purchased at The Foundation maybe three years ago for like $5.00.

I didn't see it on their website. 2002 AD has them but they want $20.  ouch.    🙁

What about stone chips or a scratch ? You can't just touch it up with new powder coat. 

You would need to strip it. Hood would be one thing but nick a quarter panel then what ?

2 hours ago, QtheGenius said:

what's your setup?  KoogleWerks header and Ireland piping after that?

I have the header and the KoogleWerks exhaust with a center exit.  

Its the Street quiet version not the Race version, still a bit loud though.

Not cheap but both pieces are very well done and beautiful. 

I bought both when he first released them so I missed the price increase. 

Maybe $200. less on both pieces.

My oldest is a metal fabricator and was impressed with the quality and price.

He does  custom Vintage V8 stuff. Cost run 4k to 8k. 

I think the KoogleWerks header is the nicest one out there and the exhaust is as nice

as any I've seen. Plus Forrest is a really good guy and answers all of my dumb questions.   

13 hours ago, chargin said:

 

FYI Ireland Engineering has a complete locally fabricated header back stainless solution on the shelf, I saw it last week and it’s spectacular 

 

 

Detail shots 

 

the whole system was similar to this one they made for me

The Candela Mfg shots are of the KoogleWerks header. Mine is two years old now I think.

I think its been at The Vintage. Looks familiar neat car.

I have the @halboyles third brake light not cheap but mine is maybe four years old and works great.

Support the people that Support the Sport.  

https://www.2002sonly.com/product-page/third-high-center-led-brake-light

4 hours ago, Preyupy said:

I watched the 1st episode with a few "non car" friends and they all laughed when I spotted the 2002 and immediately said "that's a '73 and this is 1969"?  

Looks like Inka to me.

Mine is Audi Glut Orange but identifies as Colorado. 🙂

13,14 or 15 inch tires ?

On topic is this who your looking for ? Has his email address also in the thread.

https://www.bmw2002faq.com/forums/topic/315369-new-batch-of-hobiedave-ac-brackets/#comment-1564431

Off topic, I love dogs. Oldest Son owned an Evo when he got his dog thus the name Mitsu.

1 hour ago, 2002iii said:

Yeah I used the factory hard line and almost the same location for my fuel pressure regulator.

 

Beautiful air cleaner by the way!

Thank You , timjasonperformance.com  He's a one man show and will build them to how you want air cleaners or valve 

covers done.  He called me  at home, he went over every detail to make sure I got what I wanted. 

https://timjasonperformance.com/ 

Mine is mounted on the inner fender then to the  front DCOE.  The firewall was a bit crowded on my car and the PO

had a gas hard line that went under the car then upwards at the front of car so was somewhat direct.

I used Superbriteleds.com with good luck. Been in since 2019 with no problems.

LED's are dimmable and no polarity issues. Also have NAPA el 13 flasher relay.

https://www.superbrightleds.com/vehicle?find=1973-bmw-2002-6903346&sid=izLDHMhEIu

Congrats, glad someone that likes 2002s won.  Looks to be a great car.