Sharktrainer

They checked out well when I freshened the carbs up. Same gap per the pair. Didn't inspect though to see if the plates were tweaked. 

I have mounted a dual sidedraft setup and found that there is no air bypass adjustment. Not sure how old they are but have brass floats. One side sucking 7 the other only 3 via my syncrometer. Don't know what to do at this point. 

Think I want it like lowered another 20mm in front. 15x8 20et with 205/50/R15 front and rear.

Vogtland 35mm with Bilstein yellows.

1 hour ago, svgarage said:

This guy always has something around. I've purchased from him before. He's trustworthy.

 

http://www.classicdaily.net/product/bmw-2002-2002tii-e10-stock-brake-booster-2/

Thanks. Bought the used one he had since it was only $68 total shipped. If it's bad, oh well, good for core/rebuild and keep mine from being disabled for who knows how long.

Trying to find one through my trusted online parts suppliers but everyone's stock is depleted. Anybody have a trusted source they'd care to share and that will ship to Hawaii? A big thanks in advance.

Only 3 2002's on Maui and I own 2 of them. 1 of mine will never hit the road again because of 11 years of back tax.

3 e24's here and I own one

1 e9

2 e28's

1 e12

1 e30 M3

 choke amount of e30, e34, e36, e46 and a lot of newer

If you were into Toyotas, you'd be in heaven here.

Not trying to high jack the thread but since everyone's here that's in the know of the CR 5 speed ....is the center driveshaft support bearing on my CR 5 speed the same as a regular 4 speed?

Thanks to all. To be honest I didn't think it was that bad when I bought it but boy was I wrong. Sooooo much bondo and rust. Pretty sure Rogerstii loves me with all the panels etc I had to purchase.

It took from March this year until now to get it to its current state.

After stripping down to metal and just the tip of the iceberg.

I saved this car and almost done restoring it. Actually is a 1971 with 5 speed dogleg and limited slip.

On 7/20/2016 at 8:37 PM, Sharktrainer said:

Approaching 6 month on mine. Surely I should get an honorable mention for perhaps one of the worst shape 2002's to grace this forum. Sooooooo must rust and welding of panels.

 

Anyhow, here's where I am with mine....no turning back.

 

Final color to be orange.

 

 

Almost ready for paint

Oh wow, thanks for the lead.

Approaching 6 month on mine. Surely I should get an honorable mention for perhaps one of the worst shape 2002's to grace this forum. Sooooooo must rust and welding of panels.

Anyhow, here's where I am with mine....no turning back.

Final color to be orange.

Aloha all! Curious if anyone can point me in the right direction for getting material, even reproduction for my Alpina Recaro's from an e21. Mine is torn and severely faded. This photo is from day 1 of owning the car so please don't break my balls about driveshaft and moulding between the seats, heh.

Interested in trunk lid if you'll ship to Hawaii.