artbo

15 hours ago, Jam3422 said:

Do you know if the 2002 LSD bearing covers were always machined billet?  The covers on my 2002 LSD are billet, and I've often wondered if they are original.  

 

I see the LSD drive flanges are also still available.  Weird, but good.

Prior to the set I bought a few years ago I had never seen these in billet, they were always cast and machined as were the e21’s.

Kind of an oddball part to continue producing🤔Glad to hear they’re still around!

Have you checked to see if these are available new? I bought a set not too long ago I think and they weren’t that bad $. Also they were billet rather than cast/machined. 

If you are having clearance issues you could run a shorter filter. I can try and dig up a part number if you like.

So, are you looking for the early canister style filter assembly? I don’t believe there is a spin on filter housing that re orients the filter to vertical

Sounds like a great idea to me?

So, in 72 or so the DOT required windshields stay in place during an accident. These strips were riveted onto the pinch to provide a bit of grip for the gasket. The rubber windshield gasket was also changed to accommodate the added thickness of the strips. If you used an early gasket the strips would show after install. For the most part we just chiseled off the rivets and removed the strips! Never had any negative issues. They have nothing to do with retention of the headliner.

Hey, just a heads up in case you didn’t know, the turbo gauges and so the holes in the pod are an oddball size. Larger than 2 1/6”

Hey, to clarify, are you seeking an overdrive or close ratio 245?

Overdrive or close ratio box?

PM sent

PM sent

3 hours ago, Conserv said:

Just as an FYI, I believe they are still available through Walloth & Nesch.

 

Regards,

 

Steve

 

 

Hey Steve, they are indeed available from WN. More importantly the output shafts are also available. Funny, these bits were unobtanium in the 80’s-90’s and are now being reproed. Not sure how many 235/5’s were produced, but can’t be too many. The box in my turbo is in desperate need of a new shaft! Thanks for letting me know. Hope all is well with you.

Art

17 hours ago, Dave3x72tii said:

check tsayther.com  

he had some flanges for sale, if he is selling them you can trust that they are good.

Thanks for the info!

PM sent

PM sent

5 hours ago, whs.de said:

Hi, I have it new in stock. Price is Euro 250.- plus shipping and fees.

 

Regards W.

Thanks for your response. I sent you a PM.

Looked promising, but just got the dreaded three letters NLA. So still on the hunt.

17 hours ago, jfahuna said:

Last one was gotten from bmw .

Thanks for the heads up!!

Hey, I am looking for a four bolt output shaft flange for a 235/5 CR transmission. Splines need to be excellent and bolt holes not oval. If you can help me out please send me a PM with specifics about what you have. Thanks!

On 4/25/2021 at 10:35 AM, amer02 said:

I am looking for the black plastic cover for the door handle. I need one. Thanks.

Hey, the plastic door handle inserts are sided. Which side do you seek?

Ok, I’ll take this for $1. Did I miss some part of your ad? Send me PayPal info.

PM sent

Hey, diagram is actually 51/43?

PM sent