Whos running AN- fittings ?

[Guest Anonymous]

How'd you connect to the block etc? Is it a PITA to convert?

TIA,

B

[Guest Anonymous]

My whole fueling system is plumbed with Aeroquip. I did it for safety. It is pretty expensive but when it is done, you can forget it for 20 years...

What do you want to connect on the block? Oil lines?

[Guest Anonymous]

I want to replace everything w/AN, going to run full gauges for each as well.

[Guest Anonymous]

URL: http://www.bmw2002faq.com/store/index.html

(nt)

[Guest Anonymous]

(nt)

[Guest Anonymous]

Maybe you only want to run over-hose braided sleeves. But this is soooo tacky and show-off. And did I mention useless?

[Guest Anonymous]

asking "why oil" or "why fuel". It's there to be done, because it's there. I may have a simplistic view, but AN fittings/hoses used in the correct application offer strength, performance, and insurance.

[Guest Anonymous]

(nt)

[Guest Anonymous]

and injectors that have the 60 degree flare fitting. I located some from BAT in Florida,hold on to what you got,,,,$37 dollars per fitting! They are not mandrel bent and come in straight 45 or 90, and they are black and gold. They look a little better than they sound.

They have the AN line too. If you want to pursue, I can look up the part number and shoot you a picture. I only bought two fittings and short piece of hose. I want to try it on one cylinder before I make the plunge.

[Guest Anonymous]

Thanks for the heads up tho.