320 fuel pump and accumulator; what goes where?

[Guest Anonymous]

URL: http://publish.shaw.ca/mattkehler/m20swap/Dcp_2498b.jpg

Can anyone confirm what is what and where they go? I don't wanna screw up the plumbing. Its as it was when pulled off the '82 320.

thanks

matt

[Guest Anonymous]

[Guest Anonymous]

Just curious for my turbo car project. I need atleast 20psi. Beyond the reach of most carb pumps but not beyond the reach of FI. Thanks

Kris

[Guest Anonymous]

Not sure either, but I know it will do at least 45psi, which is what my m20 needs.

matt

[Guest Anonymous]

I've measured once 6 bars from similar pump. I don't know what it is in psi but I'm sure it's enough for you!

Tommy

[Guest Anonymous]

Like a Purolator for example? I'm going to restore a 79 320i but put a performance motor in it with dual webers. It would be easier to leave the stock fuel pump setup in there.

BTW, it won't be long before a 79 320i is eligible for collector plates and the cheaper insurance! I wonder if the insurance company will notice the dual webers, hehe.

Gil

72 Tii

[Guest Anonymous]

I'm using a mallory unit I picked up for $50 on ebay.. summit price of $75.. does everything I need

Kris