Larger Throttle Body on 318i manifold??

[Guest Anonymous]

I remember from people fooling around with the 318 manifold and someone put like a mustang or something TB on a 318 manifold for better flow for either a turbo or a high rev app.. can't remember which... anyone know? thanks

Kris

[Guest Anonymous]

aluminum and two sets of gaskets (one for the 318 and one for the throttle body) to make my drill and cut templates. Spray a little adhesive on the gaskets and glue them onto the plate and you instantly have a very accurate template for drilling the holes.

Cheers!

John N

[Guest Anonymous]

Kris you take the guts out of the 318i AFM and install it in a larger unit. I did a 325i guts into a 535i AFM. its simple to do and use a 4 gas analizer or o2 sensor to adjust the AFM unit to the right spot.

Sam

[Guest Anonymous]

URL: http://www.hbci.com/~tskwiot/2002.html

1986 5.0, 58mm. Pic (and info) is from Larry Harris's efi '02 website:

http://home.globalcrossing.net/~lsh/efi2002/2002_engine.htm

HTH

Tim

[Guest Anonymous]

(nt)

[Guest Anonymous]

URL: http://www.hbci.com/~tskwiot/2002.html

. . . early '90s accord. Honda rubber coupler to a hard plastic "U" that I sawed off to make the "ell". Then into the mitsu. rubber hose to the airbox.

Tim