Fuel Screens

[bmw2002tiidriver]

I need some new fuel screens for my '72 tii. I need the one on the in-tank pickup, the cone screen that is in the pump, and the cone screen that is in the K-fisch. Thanks!

[ianpringle]

I have a sending unit intake filter from a '76 530i (VIN 5011229) - don't know if that would fit a tii???

Ian

ON, Canada

pringle_5@sympatico.ca

[bmw2002tiidriver]

No it doesn't. The tii one is round.

[jgerock]

Tii owners -

The fuel screens can be cleaned and re-used if done carefully. The fine-mesh one inside the tank seems to be the one that gets the brunt of the damage because of the high pressure fuel pump and the old, nasty fuel inside the tank. Last time I purchased one, it was about $ 14.00. The cone-shaped screen at the inlet of the fuel pump is NLA.

Not sure of the availability (or the part #) of the barrel-shaped one at the banjo bolt on the KF pump inlet (front of engine), but the tiny cone-shaped screen at the cold start valve inlet is included (mine was) when you purchase a new cold start solenoid valve.

Fuel pickup at tank

Screen at fuel pump inlet

Cylindrical screen at banjo bolt

Cold start solenoid valve (w/new screen)