Guest Anonymous Posted April 12, 2003 Share Posted April 12, 2003 I bought a crank that was supposed to be an m3. How do I identify it? Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted April 12, 2003 Share Posted April 12, 2003 if the pulley bolt is still on the front, is it 36mm? Or if you measure the snout of the crank (where the pulley slides onto), it should be bigger than the same area on a 02 crank. If you need the 02 measurement, i can measure it for you latter today. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted April 12, 2003 Share Posted April 12, 2003 (nt) Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted April 12, 2003 Share Posted April 12, 2003 (nt) Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted April 12, 2003 Share Posted April 12, 2003 (nt) Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted April 12, 2003 Share Posted April 12, 2003 I've got two M3 e30 cranks right below the table I'm typing on. Give me a shout if I can help. Jack 407-788-9081 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.