SOLD: 121ti Cylinder Head - 1968 Casting

[kbmb02]

Here's a clean, pressure-tested 121TI cylinder head, 1968 casting, at or very near full height (I measured 5.078" which is 128.98mm). Combustion chambers are unmolested and free of damage, cam spins in journals, water jackets are clean with no signs of corrosion. It's missing a few exhaust manifold studs, and the broken long stud for the water divider needs to be removed with an easy-out (which I'll do for an agreeable buyer). Guides and seats would need to be checked at time of rebuild.

It's a good unit for those looking for a period-correct early casting core for a rebuild (or to put on the shelf for a later time).

Edit 01/13/11 - "SOLD"

[twenty02_vnz]

email sent.

[kbmb02]

Email replied to, Vince.

[Jbird]

Let me know if that falls through. This would be great as a back up for Lucky #13.

[kbmb02]

Okay, Jbird. Vince has inquired, Rey(949) email me also - I'll keep you posted.

Thanks for your interest. -KB

[kbmb02]

Sold - thanks Rey.