Jump to content
  • entries
  • comments
  • views

About this blog

Follow all my mistakes and explosions while I create some boost. 

Entries in this blog

Sensor Success and Fire Safety Fun.

So I am tidying things up in the trunk, and spent some time building out a bracket to hold my E85 sensor.  I wanted it out of the elements, so I decided to mount it in the trunk to keep it dry.  I got a PLA 3D printed mount and quickly realised that I needed to do a little better.    I built the bracket below, drilled and tapped it with my newly acquired metric tap set (amazon to the rescue). It turned out ok.  The tab that says fuel I will replace with a metal one.  It is sturdy now a
  • Blog Statistics

    • Total Blogs
    • Total Entries
  • Create New...