3nSahalee

Lynnwood Pull A Part.

18306 Highway 99

Lynnwood, WA 98037 US

Phone 1:

425-778-3147

Phone 2:

N/A

Fax:

425-771-3147

Hours:

Mon-Fri 9:00 am - 5:00 pm

Sat-Sun 8:00 am - 5:00 pm

Located on Hwy 99 and 183rd (approx). West side of the road....

The 02 is located about 9 rows south of the building and about 15 cars west of the parking lot.

Specific enough?

I was there yesterday looking for a few thing for my e36.

It is a fairly complete red with black interior.

Lots of good parts still on the car.

Decent body panels and doors, some decent interior panels,

Mostly complete engine and ancillary components.

Just lettin' you all know.

O==()==O

Great, like new condition Momo hub with trim piece and horn wiring.

fits all fine-splined steering column bmws.

1980s and 1990s models, may fit others.

$65 + shipping

Seattle area

Steve

Fore 25. 9 Fore 1. one778 --- (mobile/textable)

I'd like to move the wheel further away from me and have heard of this being done.

Cut, grind and re-weld the momo hub down to a smaller height.

It looks like 2" could easily be taken out of it.

Keeping the Datster for a while, i'm gonna work on it a bit over the winter, need to finish putting it back together after the recent paint job, and then... maybe put it out there in the spring/summer.

yes, i have a '68 Datsun 1600 roadster.

pretty nice condition, it's got a fresh silver paint job.

i'm working on interior now.

it's a friggin slot car, but it's waaaay too small for me!

i'm 6'4" 230 lbs., and these were designed for 5'4" 130 lb persons.

Strong non smoker engine. Collector plates, never pay tabs again.

Complete running and driving 1970 roundie for $1250!?!!

newer weber 32/36, stiff bilsteins all around. decent tires.

engine is clean and was told by PO it was recently rebuilt.

it has the 121ti head.

car is in downtown Auburn, right off of hwy 167.

Anybody need a parts car or a great project?????

I'm losing storage spot soon and want this opportunity to go to an aficionado. Easily recoup the price and make money if you part it out.

link to ad in 2002faq cars for sale:

http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,376954/

Steve

Fore! 25. 9 Fore! 1. One 778

Strong non smoker engine. Collector plates, never pay tabs again.

Complete running and driving 1970 roundie for $1250!?!!

Anybody need a parts car or a great project?????

I'm losing storage spot soon and want this opportunity to go to an afficiando.

Easily recoup the price and make money if you part it out.

Steve

Fore! 25. 9 Fore! 1. One 778

more pics.

Nice to meet you last nite Andy!

Will keep you updated on other parts.

--- Andy bought all my extra body parts so i'm reducing price of car.

As much as he wanted to, his wife put the kibosh on him bringing home

another '02.

Car is now $1250

neglected. awaiting restoration in Woodinville, WA

southbound on I-405 thru Bellevue, WA for this nice example.

1970 BMW 2002.

Running and drivable solid project car. Minimal and easily repairable rust... not too bad though.

4 speed trans with 4 cylinder m10 engine. Weber carb. Bilstein shocks and struts.

have all trim and lights. including round tail lights in good condition and 2 sets of the rear interior and door panels in very nice condition.

Grilles are in very nice shape. Back seat is nice shape.

$1250

Steve

425. 9 Fore! 1. 1778

The mounting threads are different.

I forget which is which but i think the early wipers use a coarser spline (less teeth) than the later ones. Not sure when the change occured but i know that there are two different mounts with the arms

Steveo here.....

FWIW---

I had some chrome wiper arms from my '68 '02 and wanted to put them on my '74 to replace the chipped black arms and they would not mount the stubs. upon further inspection i discovered that the spline count was different between the black arm from the '74 and the silver arms of the '68.

Possibly it was just the very early '02s that had a coarse spline.

I ended up sanding down and repainting the '74 black arms.

Be sure to use a good primer first.

I used the SEM trim paint that Mike suggested.

Several light coats over a 1 week period and wetsanded with 1500 grit between coats. I was very happy with the results.

Still on the hunt......

Anybody?

Thanks for the info, Mike!!!

i thought the lids would all be the same....

i need a 12" lid for a single barrel carb, just the lid in nice condition.

Thanks in advance!

steve

Looking for a nice condition round black original air filter cover.

Just need the 'frisbee'.

I am after the cover from a single barrel carb, it is approx 12-1/4" diameter.

Thanks in advance!!

Steve

Looking for a nice condition round black original air filter cover.

Just need the 'frisbee'. mine is a fuzz over 12" diameter.

(Would like to p/u Seattle or Eastside area if anyone local has one)

Thanks in advance!!

Steve

Marcom, marketing and graphics guru would like to start the new year with a progressive, forward thinking company. Current employer gives no hope for professional or personal growth.

20 plus years of corporate marketing, trade show display & exhibit design and production management, and graphic design & reproduction expertise.

Current technology proficient. Advanced user computer skills.

I have yet to meet a piece of software that I was unable to master.

Plus, I know 2002s and vintage bimmers inside and out, and am a single digit handicap golfer.

Let me know if you would like to add a pragmatic thinker, out of the box visionary and all around good guy to your team.

I will consider all opportunities with a company that has legs and wants to grow their business. Prefer location on the eastside, (Bothell to Renton), but am open to longer commute for the right opportunity.

email for resume

Thank you,

Steve

stevecarlisle1 (AT) gmail (DOT) com

Haha--- too funny...

I took this pic at Brian's place last year.

I actually have jp engineerings complete guide to the conversion. It's very comprehensive with pics, digrams, parts lists and charts.

I'll scan next week and send you an e-version.

Post or send me your email.

Steve

Hello-

I'm after a decent and complete pair of window crank handles and a pair of shiney chrome door opening handles.

i think i need the door levers from an early roundie, it seems that the style changed at some point to the lever with a black plastic insert.... i'm after the solid chrome ones.

pic is attached of the parts i'm after.

These are for a 1968 nk 2000 4 door.

Early roundie 02's had this type door lever and maybe e9 coupes like a 2000cs and definitely a mid 60's NK model would have this type door lever.

stevecarlisle1 AT gmail DOT com

Thanks in advance!

Steve

Sorry for the double post.

I've got sausage fingers!

Steve

Congrats, Jeff!!!!

Wishing you and your lovely bride much love and happiness!

(1st drink is on me)

All the best to you.

Steve C.

You need someone to watch your car and shop for you.

Like this guy, maybe.........

"Come get some a this, Crackhead!!!"