FS: UPDATED: parts, parts, parts

[mikekoch]

Updated...

Eibach front springs. One progressive coil removed. $20

Decent early passenger door with glass, hardware and internals - $25

3.91 open diff. Needs seals but bearings and lash seem good - $30

3.91 diff. Gummed up inside from sitting. for parts - $20

Nice 3.64 ring and pinion for shortneck diff - $40

Complete 1600 rear swingarms including axle stubs, drums, etc - $30

2002 non-tii strut assemblies, good shape, blown struts - $40

2000 NK strut assemblies - $40

Very good e30 bottlecap rim - $30

2 195/60R14 tires, very low miles - Free

Also have a decent collection of usable engine parts including pistons, rods, a block, 121ti head, water pumps, good oil pumps, etc.

This stuff is all heavy and I would prefer local sale. I can ship if you need it.

Thanks

Mike

503-329-4073

[jonjank]

Mike,

I'm interested in the Springs, 02 strut tubes, and the door(passenger side?)

Do you have any control arms in those boxes?

let me know

Jon

jonjank@yahoo.com

[pichos1]

Mike,

I'd like to buy the E12 head. Please let me know at you convinience.

alpinaa4@gmail.com

Thank you

Jan

[mikekoch]

E12 head is gone

Mike,

I'd like to buy the E12 head. Please let me know at you convinience.

alpinaa4@gmail.com

Thank you

Jan

[mikekoch]

Still have the passenger door, strut assemblies and quite a few other various parts engine parts, etc. Also have some hubs, backing plates, diffs (no lsds sorry).

[mikekoch]

Updated again today, added some more stuff, lower prices.

Thanks

Mike

[Guest]

Still have non-tii struts available?

[mikekoch]

Still have non-tii struts available?

I still have the strut assemblies. You can reach me at 503-329-4073.

Thanks,

Mike

[JackBennett]

Don't know if you're still checking this but I'd be interested in the passenger door if it'll fit on my '76... I haffta check. Also I haffta replace my wheel bearings before I can drive down to The other 'Couve. I'm in Seattle though so it's a cinch. Do you happen to know if it fits a late model?

Thanks. feel free to email me.