Jump to content

1600 GI

Solex
 View Profile  See their activity

  • Posts

    13

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by 1600 GI

  1. 1600 GI
    SOLD to Pablo
  2. 1600 GI
    Very nice and straight set of 14" E30 Steelies 5 1/2 Jx14H2, ET35 Steel Wheels and center caps. BMW Part 1178826 As you can see the center caps need to be cleaned and need stickers. Pick-up preferred, but I can ship the set in 2 boxes for about $120 depending on location. More pictures upon request.
  3. 1600 GI
    I have the rear seat and back cover of my 1600. I believe is tan but you may be able to color match. Let me know and I will dig into my garage for pictures...
  4. 1600 GI
    Absolutely. I will take it out of your hands. Thanks for your kindness. Let me know how much shipping and where/how I can pay!
  5. 1600 GI
    Thanks again for info on the transmission toque output. I just found the post you previously mentioned. And someone seem to have purchased the guibo from BMW and seems to be the same guibo in my link. I also found that the replacement in question SFG GA000-024 is used by a drive-shaft shop. Maybe the Nm ratings are wrong on the tech specs... Anyhow. I will find out and post my findings for future users. Here is another link for a guibo supplier. https://www.actionmachineinc.com/collections/rubber-flex-discs/products/ga000-024?variant=14934638100532 Thanks,
  6. 1600 GI
    For the 2002 that is true. For an early 1600 is different. Can't go with the same guibo as it does not fit. All dealers and websites, are over $180 a piece (x3). Not something I want to spend right now.
  7. 1600 GI
    I just looked on the tech specs for a 1600 and the max. torque is 130 Nm. The 2002 max. torque is 167 Nm. The flex disk is rated 210 Nm. From that perspective it seems to work. I am not certain if the torque is the same on the transmission.
  8. 1600 GI
    Thanks so much I did not even think about the torque. Good to know.
  9. 1600 GI
    I believe to have found the solution under the following site: https://e-rubber.eu/product/sgf-ga000-024-giubo-flexible-coupling/ Much more affordable than the US options. Seems to match all dimensions. Will see when I receive one in order.
  10. 1600 GI
    I am going thru the same issue. Replacing all 3. Did the SGF GA000-024 work (Same size)?
  11. 1600 GI
    Here is a long shot. One of my transmission flex disk broke due to a broken transmission mount. I removed and and I am trying to replace all 3 guibos/flex disks. It was a confusing and daunting quest to find the correct part number since there are many different options. After ordering the incorrect ones I finally got the correct part number 26111100863, but is very expensive x3. I am hoping this group may have 1 or 2 laying around probably from a transmission swap. If you have and want to sell please let me know. Original part is JURO (Part # 26111100863) for an early 1600 model. Picture attached for reference. Thanks,
  12. 1600 GI

    1560529

    1600 GI posted a vehicle in Registry

  13. 1600 GI
    Hi; several parts for a 1968 1600. Front Grill Brackets (2) Trunk Vent Tube (1) Interior rear-view mirror Heater Cover panel - for dashboard & knobs Interior dome light housing
×
×
  • Create New...