tdk930

I am looking for a 228MM 2002 flywheel for my build and do not want to go the alum route as I want good streetability and plan a turbo in the future.  I found a 228MM from an E21.  Is that the same as the 228MM from the early BMW 2002s?  I plan on using it with a getrag 245 5 speed trans if that helps.  

Used Air cleaner Parts. Nothing special but could be handy on a budget build.

Location: Shrewsbury, PA

I have some Hella H500 lenses and a cover for sale. Looking for $15 per lens and $10 for the cover.

Location: Shrewsbury, PA

I have a used Tii throttlebody for sale. See pixs.

Location: Shrewsbury, PA

I have 2 Bosch EFI pigtails that i don't need from an EFI harness build. Both for $5 + shipping.

Location: Shrewsbury, PA

I see that some vendors include an instruction manual with their 5 speed conversion kits. I have a kit from 2002 Haus and looking for a copy of the instruction manual for the install. If anyone has one - please drop me an email.

Thx

Location: USA

Like new Wiseco forged pistons for a turbo build.

Pics here:

https://picasaweb.google.com/103833638746633093201/DropBox?authkey=Gv1sRgCIaAk7XG-vv3GA#

Todd

Location: Shrewsbury, PA

Thanks. I was hoping to route it through an existing hole and I don't see any other than the one that routes through the foot-well to the rear of the fender but may cable is lot that long.  I think i will just drill the hole and mount it in the glove-box. 

I have a used head and intake that can be used for an EFI conversion. The head is the one with the injectors mounted in it instead of the injectors in the intake.

Location: Shrewsbury, PA

Used 2002 Tii Script

Location: Shrewsbury, PA

I have 2 excellent condition, no rust , used rear brake backing plates.

Location: Shrewsbury, PA

I think that 2 of the holes are 14 mm and one is 12 mm.  Does anyone know what size the dash sensor is?

Anyone using the Megasquirt for EFI and using the relay board?  Looking for feedback on how to run the RS232 from the relay board to the CPU.  Did you cut your own hole through the firewall or is there somewhere to run this through an existing opening?

Any other help or feedback would be great. 

Thanks for the help.

Todd

Hi - looking for a copy instructions for the 2002 Haus 5 speed conversion kit.  Have the kit - need the instructions.  Thanks.

Todd

I have a used script for a BMW 2002tii. Looking for $25 + ship.

Location: Shrewsbury, PA

replace the strut bar - love the setup!

I have an extra Nissan TPS sensor and a CNC machined TPS adapter for use on the 318i and 325i BMW throttle bodies. Parts are new from 02again. Very high quality.

Location: Shrewsbury, PA

I have an extra EFI conversion block off plate that works with the 318 manifold. Part made by 02again and is of high quality. Ended up with a spare one that I don't need. $15 shipped in CONUS.

02 fuel pump block off plate. Complete with 2 stainless steel allen bolts to replace the stock studs.

Location: Shrewsbury, PA

Looking for the build thread on this car, can't seem to find it anymore.  Anyone know where this is???

Hi,

I upgraded by 76 2002 to an Ireland coilover setup.    It handles great and the stance is nice.  The only issue its that it has that spring settling sound every time i take it out like it was just jacked up and lowered.  That DOING - DOING sound.  Any idea how to get rid of this?  Not sure if its front or rear.  I rebuilt the complete rear end and did bushings all way round.  Just want this noise to stop.

Todd

Haltech E6K. It comes with a manual, harnesses pigtail, dial and laptop connectors. It will do both

fuel and spark.

Gas tank is spotless inside. outside is in great condition. small surface rust on one seam area. No sender or pickup.

See pix

Nice used AC Console. See pix.

I have some nice used tii throttle linkage parts. See photos.

Looking for an Hot EDIS coil and wires.

Todd