Jump to content

kpolito99

Solex
 View Profile  See their activity

  • Posts

    233

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by kpolito99

  1. kpolito99
    I have two front struts mounts that have been used for less than 25K miles and have no cracks or issues. Working perfectly fine when removed recently to install a set of GC upper camber plates. Asking $50.00 plus shipping for the pair. Dust covers are also available for another $10.00. Thanks
  2. kpolito99
    3 bolt output flange for 4 0r 5 speed gearbox. This will enable you to operate a larger flex disc (guibo) with your driveline provided you have the matching end on your drive shaft. Asking $75.00. Buyer pays shipping charges. Thanks
  3. kpolito99
    2002 Tii front hubs with bearings, shields and grease caps. I installed these parts new and have accumulated roughly 55K miles. These parts are in excellent working condition and were removed to accommodate installing a larger BBK which required E21 hubs. Asking $100.00 plus shipping to anywhere inside the US. I recommend Paypal and will provide payment information upon request. Thanks
  4. kpolito99
    Asking Price Part Description $45.00 M10 Water Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,712946/#712946 $60.00 Pair of front strut mounts http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,818901/#818901 $75.00 3-bolt gearbox output flange http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,818900/#818900 $100.00 Tii front hubs http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,818895/#818895 $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ $200.00 Jacobs Electronics ProStreet Ultra Team Ignition with Boost Timing Master. Cockpit adjustable controls for total advance, boost retard and rpm limiter. Includes 65 Kv Jacobs Ultracoil with 8.5 mm MSD spark plug wires. $250.00 Blitz Sequential Boost Controller with 1/2 DIN digital cockpit display. $400.00 Haltech F-9A Engine Management System with closed loop O2 control. Includes harness, MAP sensors, O2 sensor, H2O temp and Air temp sensors. Buyer will need to connect the trigger from distributor and select an appropriate throttle position sensor for their engine. $400.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/
  5. kpolito99
    All of the items pictured on this thread have been sold!
  6. kpolito99
    I have a set of front brakes for sale which have approximately 50K miles of use. tii hubs, bearing, seals front dust shields front calipers (for tii struts) SS brake lines New cross drilled/ventilated rotors New PBR street pads Been asking $500 for the set but will sell everything for $350 buyer pays for all shipping charges. ** I also have two sets of standard rotors that are in decent condition but need to be surface cleaned, just kissed with the lathe. Been sitting around for a while collecting rust.** Thanks for the interest. All parts are located in Tampa, FL.
  7. kpolito99
    Asking Price Part Description SOLD - M10 Water Pump Pulley - SOLD $100.00 Tii front hubs with bearings, shields and grease caps. $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ $400.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/
  8. kpolito99
    Payment received, thanks John!
  9. kpolito99
    Still available as no payment has been received.
  10. kpolito99
    $20.00 for set of (8) eight wheel studs with nuts for e21 hubs. These came with a recent BBK purchase from Ireland Engineering but I am using longer studs with my wheel spacers. These have new been used and are $2.75 each.
  11. kpolito99
    Asking Price Part Description $10.00 M10 Water Pump Pulley http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,714508/#714508 *** SOLD BMW Wheel Studs SOLD *** $100.00 Tii front hubs with bearings, shields and grease caps. $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ $400.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/
  12. kpolito99
    Asking Price Part Description $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ $500.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/ $10.00 M10 Water Pump Pulley http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,714508/#714508
  13. kpolito99
    SOLD and ready to ship!
  14. kpolito99
    Asking Price Part Description $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ $500.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/ $10.00 M10 Water Pump Pulley http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,714508/#714508
  15. kpolito99
    I sold the pump and the buyer had a much older car and claimed that the heater bypass fitting was not in the correct position for his vehicle. I offer money back guarantees for all my parts so I gave him a refund and he returned the pump to me. The tii water pump that I orignially purchased from Metric Mechanic is once again for sale. Please view the images to ensure the casting is the same as your currrent style pump before purchasing. Thanks -
  16. kpolito99
    Asking Price Part Description $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ SOLD SOLD SOLD tii Water Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339058/ SOLD SOLD SOLD $500.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/ SOLD SOLD SOLD Valve cover http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339270/ SOLD SOLD SOLD $10.00 M10 Water Pump Pulley http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,714508/#714508
  17. kpolito99
    Asking Price Part Description $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ SOLD ** Wiseco Turbo Forged Piston set http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,793827/#793827 **** SOLD $45.00 tii Water Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339058/ $500.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/ $85.00 Valve cover http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339270/ $10.00 M10 Water Pump Pulley http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,714508/#714508
  18. kpolito99
    Asking Price Part Description $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ $500 Wiseco Turbo Forged Piston set http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,793827/#793827 $45.00 tii Water Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339058/ $500.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/ $85.00 Valve cover http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339270/ $10.00 M10 Water Pump Pulley http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,714508/#714508
  19. kpolito99
    Asking Price Part Description $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ $500 Wiseco Turbo Forged Piston set http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,793827/#793827 $45.00 tii Water Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339058/ $500.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/ $85.00 Valve cover http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339270/ $10.00 M10 Water Pump Pulley http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,714508/#714508
  20. kpolito99
    I paid just over $700 for this custom set of 92mm forged turbo pistons that measure 9.5:1 CR with the e21 combustion chamber and standard head gasket. These pistons were operated for less than 20 minutes during a break-in when I discovered that my block had been improperly inspected, was cracked and elected to tear down the entire engine. I know it sounds ridiculous but I trusted a machine shop that I had never used before and assumed they would properly inspect my block when fitting pistons and checking the crank align bore. If I could get $500 for these like new pistons I would be ecstatic. I have elected to go bigger and simply use an S14 block for my next rebuild rather than pay for fabricating another deck plate to over bore an M10 from 89 to 92mm. Please make offers if you are interested. These are very high quality with a mild dish. The squish band around the perimeter of the combustion chamber has been preserved. Includes, rings, wrist pins and retainers.
  21. kpolito99
    Asking Price Part Description $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ $500 Wiseco Turbo Forged Piston set 92mm bore 9.5:1 with e21 head $45.00 tii Water Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339058/ $500.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/ $85.00 Valve cover http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339270/ *** SOLD***Injector Manifold ***SOLD*** $10.00 M10 Water Pump Pulley http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,714508/#714508
  22. kpolito99
    Asking Price Part Description $100.00 CIS Fuel Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339043/ $500 Wiseco Turbo Forged Piston set 92mm bore 9.5:1 with e21 head $45.00 tii Water Pump http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339058/ $500.00 Front BBK http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339086/ $85.00 Valve cover http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339270/ $25.00 Injector Manifold http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,339307/ $10.00 M10 Water Pump Pulley http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,714508/#714508
  23. kpolito99
    Looking for an e21 style brake fluid rez with cap, float and strainer. I believe the same style of reservoir was used on the following vehicles: 77-83 320i 84-85 318i 85-88 325e Please send me photos and price if you have one in good condition. kep2005@verizon.net Thanks -
  24. kpolito99
    Hi Ian, I am a friend of Mike Bonkalski's and he referred me to you when I asked him about roll cages. Your work is impressive and I am curious how much the cage in a box kits cost? I drive a turbocharged 1976 non sunroof 2002 on the street and could use the extra margin of safety if I am ever involved in an accident. I guess since I do not track the car other than an occasional auto-X or driver's school I would be interested in learning more about the easiest access and most street friendly version you have designed. Can you send me some CAD images of this version or photos of one that you have installed in a 2002? Thanks in advance, Kurt
  25. kpolito99
    Mike, Sorry to learn this guy flaked on you. Did you find any other good leads on roll cages?
×
×
  • Create New...