Jump to content

e39krazy

Solex
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by e39krazy

  1. e39krazy
    Open to offers, Going to be M20 turbo swapping, and I do not wish to store any of this. I know me Ill have this sitting and see a shell, buy it have another car and I just don't have room. So basically anything m10 related or that wont be working with the m20 needs a new home Motor runs well, still in car and most likely will be for awhile unless someone wants to buy then Ill take it to my uncles shop and remove it. Stamped e21 2.0 head, weber 38/38 carb with electric choke. Pertronix dizzy with new cap and rotor, valve cover gasket replaced, new belt, new alt bushings. Chassis of car shows 91k miles but is a 74 so TMU. Long tube headers, also brand new exhaust on the car can sell that too Transmission 4 speed, speedo output works, has issue sliding into 2nd but will if you get it just right, i did put new bushings in it could just need to be adjusted, New Guibo, new MTl fluid. Dif works great new liquimoli fluid Can take radiator, hoses etc, I can strap it to a pallet and load in the back of your truck
  2. e39krazy
    hey do you still have these
  3. e39krazy
    Do you happen to have the back of the fuse block on a 74 what its supposed to look like? I have a random green and a green white (this wasnt even pluuged in)
  4. e39krazy
    Finally had a chance to get over to the shop and do a little more digging, it seems like the black/red is missing from the back of the starter, this wiring comes in from a separate area into that brown harness. Everything else seems like old uneeded wires. Going to strip it down remove that relay that seems to do nothing and go from there. Will keep it in box of parts just incase but I really have no where else for this to go. It is also a separate loom from the rest going into the fuse box , so easy delete
  5. e39krazy
    yes this was labeled 12v K. i did meter the wire it had no voltage. So is that normally on the emissions loom?
  6. e39krazy
    Mine is a 74
  7. e39krazy
    1974 BMW 2002 4-Speed BRINGATRAILER.COM Bid for the chance to own a 1974 BMW 2002 4-Speed at auction with Bring a Trailer, the home of the best vintage and classic cars online. Lot #92,775. Like in this car here, that harness seems to be plugged into the water choke, car still has all emissions and seems like the harness is also plugged into a sensor in the back of the intake
  8. e39krazy
    Temp sensor wasn't plugged in at this point, was in the harness with the starter wires and such. No clue where the choke wire is, going to be running a new one for the weber. Ive been looking through photos of 74s on bring a trailer for reference and I just cant tell.
  9. e39krazy

    e39krazy

    e39krazy posted a Community Map marker in Members

  10. e39krazy
    1974 2002 Before you roast me, I have looked over the diagram many times. These crunchy brown wrapped wires have me stumped. Tested wires and have no clue where these are supposed to go. They go into a relay and when I unplug this relay nothing seems to change. At this point I'm starting to wonder if its for old emissions that's no longer there. Its not wiring for the washer pump as ive already found and tested that in the passenger fender area.
×
×
  • Create New...