BigLiquid530

1 minute ago, ray_ said:

I think you can find some that will. 

 

There's a bulb number reference in the tech articles on the board here. 

 

Find a compatible LED that's the color and brightness you want. The Amazon LEDs I linked are red. 

 

If you use LEDs in your signal bulb housings,I think it's likely your dash turn signal indicator won't flash due to lower resistance in the circuit. 

 

There are workarounds for that, though.

 

Cheers,

Sounds good will check it out thank you

5 hours ago, ray_ said:

Stock is all clear.

 

;-)

Do you think those would work on the front signal lights?

Sounds good, I really appreciate the help, and the pics. 

Thank you

Never opened up the taillights how many bulbs are in there? 2 red 1 white?

Plug and play is even better!!!!! Now I could get my new headlights instead ?

The classic Auto are pretty damn Brite, and look great. The bottom is pretty bright also and look good. When using the ones from Amazon, did you have to modify anything?

Both look pretty amazing

6 minutes ago, jimk said:

I have a set of LED conversion lights in a 71 roundie from ClassicAutoLeds (the same ones on the Blunt site).  I don't have another person to take the pic or to hold the brake so I have no photo, but I received a comment from another 02er and the MidAmerica02Fest that the lights are really bright.  When the brake is applied the normal tail light comes on along with the brake light segment.  I don't recall what happens if the lights are on if the tail light becomes any brighter.  Download the instructions from the Classic site.

Looks like a really nice kit they put together. I could only imagine how bright they are. Now I need to decide on the kit or some projector headlight's. Decision's, decisions. 

Thanks for the reply really appreciate it

I wanted to see how they look lit up, but thanks for the link also ?

How many feet did you guys order of the stick on?

I know it's an old post but can you post a pic of the L.E.D. Taillights

Looked like a great project

Is it 5 speed, how much, and location?

Yo! I know it's an old post but you still in YC? 

So if I bought these LEDs is it pretty much just install and that's it or was there any customization that had to be done to fit. Also would these work on the Euro signal lights?

On 11/20/2013 at 2:23 PM, bluebeem said:

don't have pics of the sealant, but it is 2 layers of a non-hardening

caulking cord, about 3/16" diam. in light grey, actually looks somewhat

like the stock gasket when installed. the stock gasket won't work with

the kit, but this stuff keeps everything dry.

Kinda of an old Post but do you still sell the kit?