Jump to content

Gre@semonkey02

Solex
 View Profile  See their activity

  • Posts

    705

  • Joined

  • Last visited

  • Feedback

    50%

 Content Type 

Everything posted by Gre@semonkey02

  1. Gre@semonkey02
    So I'm running right now had the car out this morning 130 main 50 idle jet ( u says to run 45f8 jet ? )F9 e tube 180 correction 36 mm choke 4.5 aux ventury 200 needle and seat 45 pump jet 40 pump spill Alot of guy run 34mm choke and 5.0 aux ventury or should I keep it how it is ? Sent from my Pixel 3 using Tapatalk
  2. Gre@semonkey02
    I am in Ontario Canada Sent from my Pixel 3 using Tapatalk
  3. Gre@semonkey02
    Okay I'll do that Also what's good numbers for my Weber 45s Sent from my Pixel 3 using Tapatalk
  4. Gre@semonkey02
    Okay well I ordered the carbs from IE and they sent them with those idle jets and main jets I have the carb came with 55f8 idle jet And I can't check tining at the front the timing finger is gone because of the pick up ring and I have a after market flywheel so I can really check timing at the back hole So I should drop the 3000 to like 15 so that total of 30 advance Sent from my Pixel 3 using Tapatalk
  5. Gre@semonkey02
    My jet says 50 no f number and I'm not running dizz I'm running xdi ignition box so I talked to few guys they run 16 initial timing on the box and 3000 is about 21 to 24 degrees and 8000 is usually -2 to 0 Sent from my Pixel 3 using Tapatalk
  6. Gre@semonkey02
    Okay Cold start not hooked up but still there Sent from my Pixel 3 using Tapatalk
  7. Gre@semonkey02
    Timing Initial is 16 3000 is 21 And 8000 is 1 Float level they are brand new carbs didn't touch float level fuel pressure 2.0 to 2.5 psi Sent from my Pixel 3 using Tapatalk
  8. Gre@semonkey02
    With the xdi box My plug are black so I'm rich gotta change the jetting emulsion tube gotta go to F9 I have F16 in them Sent from my Pixel 3 using Tapatalk
  9. Gre@semonkey02
    36mm 450 aux Sent from my Pixel 3 using Tapatalk
  10. Gre@semonkey02
    I just put a new set of Weber Dcoe 45mm they we're jetted from the supplier Engine Specs 91mm bore 10.1 compression 292 cam Xdi ignition Stahl headers And carb specs 130 main jet F16 emulsion tube 180 correction 50 idle jet It's seem to run rich or my timing is off I drove the car this morning and I can hear a pooping nose from carbs while drive low speed cruising the carb are all sync and stuff idles great I need help Sent from my Pixel 3 using Tapatalk
  11. Gre@semonkey02
    Brand new set of Dcoe 45 trumpets 100$ plus shipping Original Cold start delete kit 120$ Plus shipping PayPal accepted Sent from my Pixel 3 using Tapatalk
  12. Gre@semonkey02
    Here Sent from my Pixel 3 using Tapatalk
  13. Gre@semonkey02
    Late ones same bearing as my 76 2002 hubs Sent from my Pixel 3 using Tapatalk
  14. Gre@semonkey02
    I bought brand new set of e21 hubs I installed new bearing and races and went to put the seals in and they fell in didn't have to tap them in and it spins in the bore need help ? http://cloud.tapatalk.com/s/5ca13980687d6/VID_20190331_174244.mp4 Sent from my Pixel 3 using Tapatalk
  15. Gre@semonkey02
    Yes pm me Sent from my Pixel 3 using Tapatalk
  16. Gre@semonkey02
    SOLD Sent from my Pixel 3 using Tapatalk
  17. Gre@semonkey02
    Brand new set of 45 Dcoe trumpets 140$ shipped PayPal accepted Sent from my Pixel 3 using Tapatalk
  18. Gre@semonkey02
    Bump Sent from my Pixel 3 using Tapatalk
  19. Gre@semonkey02
    Bump Sent from my Pixel 3 using Tapatalk
  20. Gre@semonkey02
    Bump Sent from my Pixel 3 using Tapatalk
  21. Gre@semonkey02
    Bump Sent from my Pixel 3 using Tapatalk
  22. Gre@semonkey02
    All my email? That I was giving u my measurements and your sending back something totally wrong with 2 red lines wtf is that. so don't put the blame on me I paid you for your services. I didn't know it was so hard to cut a piece out and ship it out ridiculous. Sent from my Pixel 3 using Tapatalk
  23. Gre@semonkey02
    Yes I have is full carpet kit it's perfect Sent from my Pixel 3 using Tapatalk
  24. Gre@semonkey02
    thank you i gave him measurements and never got my piece still waiting for a piece of carpet from him Sent from my Pixel 3 using Tapatalk
  25. Gre@semonkey02
    I wouldn't be disgruntled if u worked with me and sold me a piece of carpet Sent from my Pixel 3 using Tapatalk
×
×
  • Create New...