**SOLD**Hub adapter for 2002 steering columns. 3-1/2" extension, 6-bolt pattern w/2" center hole. It came off my '73 and I believe its a Momo model #152.
$40 + s/h from 22315
I've had several inquiries about the IE Bilstein Struts...
These are shortened approximately 2" by IE and have been re-valved for racing. They require a shortened strut housings (but I have seen them run with spacers in the strut housings). I have one strut housing you can have to use as a template if you want it. The housing also has a welded spring perch for coil-overs (not included). You can shorten the housings yourself or have IE do it for you - I think they charge $250 shorten and install the spring perch.
Hope this helps.
- Dave
All parts came off my '73 ITB race car.
Rear window glass $50
Left rear window glass $25
Right rear window glass $25
B-pillar chrome trim (L&R) **SOLD**
Metric Mechanic 4-speed transmission **SOLD**
Drive shaft w/center bearing & guibo $50
13x6 basket weave type wheels w/Toyo tires (4) **SOLD**
IE Bilstein race struts (almost new / used once) $200
Front hubs with new rotor (L&R) $60
Bilstein rear shocks (2 - not new) $10
Rear springs - 350lbs - $50
Rear sway bar (stock) $10
Parts are in Northern Virginia. I will try to keep the list updated as parts are sold.
Thanks,
Dave
I couldn't tell you if the cylinder is good or not. It was on my race car and there was no need to lock it. Press the button and the door did open though.
Email me offline for directions and time if you still want it.
Dave
I can't remember the offset but I ran them with a small spacer and fender clearance was tight with the Hoosier race tires but standard tires should be no problem.
-Dave
Sorry Fellas, I assumed the forum would shoot me an email when I got a reply.
Yes, I still have the wheels. They are in my trailer in Winchester. I can pick them up this weekend and bring them back to NoVa.
-Dave