Jump to content

Gerrys74Tii

Solex
 View Profile  See their activity

  • Posts

    7

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by Gerrys74Tii

  1. Gerrys74Tii
    Thanks Chris. I installed the Bosch Red coil and all seems A.O.K. so far.
  2. Gerrys74Tii
    Hi Woody, I would love to get a set (aluminum faced) for my 74 tii hood. Please send me an invoice and payment method (PayPal?). Thanks!
  3. Gerrys74Tii
    Thanks! I love this Forum. I called the folks that sell the "Ultimate Spark Package" for the 2002 (Top End) about the need for a resister with the Bosch Red coil. They confirmed that no resister was needed with the MSD-6a with Bosch Red coil setup. However, after reading most all the information on this site, I remain confused as to why no resister is necessary. What does the MSD do that makes a resister unnecessary? Does the MSD regulate the voltage delivery to the coil and thus eliminate coil overheating? Also, Frank, I am wondering about the use of a MSD coil over the Bosch Red or Pertronix Flamethrower (with resister). The MSD delivers 45,000 V whereas the others deliver 40,000 V and appear to have different secondary windings and other specs. I like the possibility of using all MSD ignition products together. Does MSD make an ignitor for the 2002? I didn't find one in their product listings. Thanks again for your advise and experience!
  4. Gerrys74Tii
    Thanks for your advise. I now recognize that the wire in question is the 12V switched wire that is was looking for (this red/black wire doesn't go to the starter but to the fuse box). All is hooked up now and working wonderfully! The Red coil, however, overheats and the car will stop running when warmed up. Guessing that I need a ballast resister in the path between the coil and Pertronix igniter or a newer igniter (my current one is 10-13 years old). I'll need to research the forums to see how others have dealt with this same issue. In the mean time, any fresh ideas out there about the need for a resister in line with newer Pertronix igniters or other igniters on the market that you would recommend? Thanks again!
  5. Gerrys74Tii
    Setup: 74 tii (Korman 2-stage conversion to side draft Webbers), Pertronix ignitor system and Bosch Blue coil. I am installing a Bosch Red coil, MSD-6a and Tach Adapter and need clarification about the wiring: 1) where does the red/black wire from the Starter to Coil (in my current setup) interface with the MSD-6a? 2) which 12V switched wire is best to connect to the Pertronix (red,+) and MSD-6a red wires? Thanks for any advise!
  6. Gerrys74Tii
    gsmith@stemcellstudios.com Thanks!
  7. Gerrys74Tii
    When you say "clearance" around the ignition...what do you mean? Do you have a pic to share of this item? Also, which trim panels do you have available? Thanks. Gerry
×
×
  • Create New...