Jump to content

boxy02

Solex
  • Posts

    888
  • Joined

  • Last visited

  • Feedback

    100%

Posts posted by boxy02

  1. Price: $1
    Location: SoCal


    Description:

    Free.  I have right and left rear interior panel vinyl, pressboard pockets and arm rests. Basically everything but the large pressboard for the panels. If you have a need for them come and pick them up or you cover shipping. Thx,

    Mike

     

    57A6A71E-C9D3-4686-A6B7-796D9FC7F37B.jpeg

    • Like 1
    • Thanks 1
  2. On 12/27/2020 at 5:56 AM, pehlivanov_tii said:

    I am about to do this too, but can you guys please tell me where the exactly the holes should be for the clips? I do not know what size from lets say the doors the holes should be what is the diameter of the holes and how many should be the holes. The thing is that the sideskirts were replaced and the new sheet metal came without drilled holes for this. Is there an blueprint or something where this is visible?

    Pehlivanov, I took some photos from the passenger side rocker of my ‘74 02. Since mine is flared, I don’t have the measurement of the hole for the front lower fender or the rear of the rocker connected to  the quarter panel. The hole diameter is about 7.5mm. Good luck! Measurements are from hole center.

    -Mike

     

    4E75C808-43BB-4E18-8AAD-D7196304BACE.jpeg

    91B65E7A-81FA-4029-91B0-7DCCFF6A5A40.jpeg

    C1A3A912-E22C-4490-B126-7295F08F2927.jpeg

    84524616-B853-4731-A4C0-2E761BEBCC2E.jpeg

    23648F7E-FC24-4F87-B529-BB2CB24B8DE2.jpeg

    DA565672-9ACC-4788-9D2B-08988C10469B.jpeg

    092B8439-A046-4B9D-BD43-6FF5DBB53754.jpeg

    3AE60B8D-D3C4-4E92-B959-1825342838F0.jpeg

    241D6C4F-0807-4690-A3A5-2D2E7A7188D0.jpeg

  3. On 12/14/2020 at 8:37 AM, URO Parts Support said:

    Actually the small flat-rate USPS box currently costs $8.30 and only fits a VHS tape; a pair of door seals is much, much bigger.  Suppose they could be stuffed into a medium size box, but they probably wouldn't look very good after delivery.  We try to bag them in big loose loops to minimize twists and bends taking a set, in fact Genuine Porsche often ships their seals strapped to huge cardboard sheets in massive boxes to avoid flexing the seals out of the installed position.  If you order a door seal, the box can be as big as an entire door.

     

    USPS has been terrible lately, they often sit on packages for a whole week before even scanning them into their system, so it looks like the week delay was the shipper's fault and not theirs.

    Hi, I bought the old, hard rubber URO door seals from Pelican Parts like 6 or 7 years ago. I’ve accepted that you probably can’t do anything for me regarding new, spongier rubber door seal replacements.  

     

    However, when someone purchases from Pelican Parts are you drop-shipping the new, spongier versions? I just want to avoid them shipping the old versions if they keep a stock of your parts.

     

    I’d like to buy new improved ones because the old ones never did form to my door and therefore don’t seal water & air out. They still push my wing window frame out about 1/2” - 3/4”. I need to literally slam both doors hard to get them to latch completely.

    Thx,

    Mike

  4. Great job and kudos for jumping in! As @AceAndrew said a few posts ago, I too, learned everything about autobody collision repair and painting at my community college. Great instructors, guidance, tools, frame rack, 2 spray down draft booths, & 3 primer bays (along with an 8-bay, 2-vehicle deep workshop...). A great learning environment! I love that you’re gaining confidence in major body repairs/refinishing! ??????

  5. 4 hours ago, reyes02 said:

    Question, do you have to be a member to “wear” one of those? Or is it just like any other badge?


    - Reyes

    While club membership isn’t required, the BMWCCA Police (a division of the Mattress Police) will cite you for fraud.

    • Like 1
    • Haha 2
×
×
  • Create New...