02MonsterMike
-
Posts
40 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Articles
BMW 2002 and BMW Neue Klasse Wheels
Colors
Steering Wheels
Production Years
Models
Registry
BMW 2002 Vendors and Shops
BMW 2002 Books
The Hack Mechanic
Forums
Blogs
Gallery
Events
Store
Books
Community Map
Videos Directory
Posts posted by 02MonsterMike
-
-
positive side of the coil.
I've run a battery relocation cable from the E30, and have the distribution block. Does the wire go directly to there?
I've looked at the wire schematic and it shows a wire coming from the ignition switch....I can't find that....
I was able to turn over the engine...but obviously not started yet...
Please help.
Thanks,
02Monster
-
the front subframe at the engine mount bolt?
I did a battery relocation to the trunk.
Is there anywhere else that other people have used as a ground?
Thanks
02Monster
-
Needed in excellent condition...no dings, scratches, or oxidation.
Email me at 2002monstermike at sbcglobal dot net
-
Has the terminal, and bolts. About 3 inches is cut from the battery end....but you will need to splice in about two feet of 1 aught cable either way to relocate to between the shock towers in the trunk.
$50 shipped.
Thanks,
02Monster
-
do you need both inboard and outboard for passenger and driver seats, or just driver seat?
Thanks,
02Monster
-
I've got a Weber 38/38 and I need to add a fuel return line to the carb. It currently has one fuel inlet and one plug. I need to remove the plug and replace with another fuel inlet.
anybody have one available?
Thanks
02Monster
-
-
Email me at 2002monstermike at sbcglobal dot net
-
$150 shipped.
Rewrapped with the low gloss tartan tape.
Let me know.
2002monstermike at sbcglobal dot net.
-
-
Done...
- front 22mm sway bar with urethane bushings and new links
-new rotors and pads
Doing this weekend...
-new Bilstein sport strut inserts
-new upper strut bearings
-new urethane bushings
Haven't looked at ball joints or tie rod ends.
New engine mounts and steering coupler to follow...
Thanks
02MonsterMike
-
I'm replacing the front bushing on my friend's car.....its shakes, rattles and makes lots of noise when he drives it.
I went through the search function here and was unable to find a procedure or trick to getting the old rubber bushings out of the lower control arms. Wasn't there a long bolt with large and small washers setup that somebody used to get the bushings out?
Any help would be great....I have this weekend to do it since he's out of the country on business.
Also, does somebody have a procedure to tune a Weber 32-36 so that its not so rough at idle?
Thanks
Mike
-
-
have we met?
02MonsterMike
2002MonsterGarage
Waterford, MI
-
I just measured the various driveshafts that I have and some are (measured from flange to flange, without guibo or bolts) as being either 600mm or approximately 548mm.
Is the longer one for the 4-speed?
Trying to sort things out.
Thanks
02MonsterMike
Job news to come....I just need to get my head around some things first.
-
(nt)
-
-
-
-
I've been infatuated with the Subaru WRX STi exhaust sound lately, and I need to find out how I can attain that same sound with a BMW 2002.
I'm going to be running an engine with 12.5:1 CR, Schrick 292, Weber 38/38, and a tii exhaust manifold.
Any suggestions.
TIA
02MonsterMike
-
-
I emailed the guy and didn't reply....The photos that are in this auction are the same photos for the last auction.
I'd be very careful.
02MonsterMike
-
load some of their music.
Cool
02MonsterMike
-
check them all and let me know?
Thanks...I really appreciate it.
02MonsterMike
PS....can anyone recommend a free photo hosting site....I won't have my Earthlink FTP site for much longer.
Thanks again.
Need E30 battery relocation cable
in Parts Wanted
Posted
$50 shipped from Detroit, MI.
Thanks,
Mike