Jump to content

vegashelipilot

Solex
 View Profile  See their activity

  • Posts

    24

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by vegashelipilot

  1. vegashelipilot
    Very interested, just wondering if anyone has got it to fit in the engine bay of a 2002.
  2. vegashelipilot
    Here's Porsche Oak Green Metallic. (try to overlook the shotty paint job, the cap on my can of clear coat pooped out on me midway). I really like the coarser flake. It is a beautiful color in bright sun. But it looks almost black in the shade and I'm not sure how I feel about that.
  3. vegashelipilot
    That's great advice. I actually just watched a YouTube video where a guy sprayed the same base color over 5 different colors of primer. The difference was significant. When I painted my E30 I actually tinted the sealer with the base. It came out a pretty close match to the original color.
  4. vegashelipilot
    Here is the AlpinaGrun Metallic on an old motorcycle rocker cover I had lying around. This is the older version found on the E30 and E34, not the current BMW models. I like that its still a BMW paint code, but there are a couple Porsche greens that I'm really curious about as well, like Oak Green Metallic.
  5. vegashelipilot
    I'm about in the part of my restoration that I must decide on a color, and I have been really leaning towards green. I think I've seen all of the original 2002 paint code greens, I'm hoping to find some photos of cars painted other non-2002 paint codes, especially metallics. I had some 90's-era Alpina Green Metallic mixed up and sprayed some spare parts. It is definitely a top contender, but its always difficult visualizing a color on the entire car without seeing a photo. Post what you got with the associated paint code / name please!
  6. vegashelipilot
    Anyone still producing the Kamei style air dams? Or know where to find one? EDIT: Pierre is still making reproductions as of this date (Nov 2023) and he got back to me via e-mail. His e-mail is bimmerfan02@hotmail.com for anyone looking now or in the future.
  7. vegashelipilot
    That's what I figured. But couldn't find the diagram on RealOEM and did not want to make the mistake of swapping it out if it was supposed to be there. Thanks guys.
  8. vegashelipilot
    I Was re-installing my crankshaft with new main bearings yesterday and noticed I had one washer different than all the others (see pictured). It was on bearing cap 4 and looked like it had a rubber material on it. All of the others were standard wave washers. Considering replacing it with a wave washer like the others but wanted to make sure there wasn't a purpose for it to be there first.
  9. vegashelipilot
    Fantastic, thank you!
  10. vegashelipilot
    Building my motor and my crankshaft has a pretty deep groove at the rear main seal. I saw that a shim was available to get the new seal to ride on a virgin area of the crankshaft but is now NLA (part 11141252897) Anyone have any advice on how to tackle this since the shim is no longer available? Would hate to get this thing all buttoned up and it leak at the rear main seal.
  11. vegashelipilot
    Ok, breaking out the sledge and/or cutting wheel, lol. Thanks
  12. vegashelipilot
    here's the other side
  13. vegashelipilot
    Interesting, they're pretty identically bent if that's the case.
  14. vegashelipilot
    So my ‘69 2002 did not have sway bars (among several other parts) when I purchased it. I figured someone had taken them for another car or something, but after trying to fit a stock front swaybar to my subframe today I was running into serious clearance issues with the tow hooks and noticed my tow hooks are “upside-down” from most of the photos ive seen online (mine swoop up instead of down) Wondering if I’m going to have to cut them off to mount this swaybar. Anyone ever run into this issue?
  15. vegashelipilot
    attempted to PM. your inbox must be full.
  16. vegashelipilot
    Looking for a matched pair of Dellorto DHLA 40's.
  17. vegashelipilot
    pm sent
  18. vegashelipilot
    Yeah good point, not pulling the trigger on any pistons until the machinist takes a look.
  19. vegashelipilot
    Awesome thank you. These flat tops should be compatible with any head (121, e12, e21) should I need to find another head, correct?
  20. vegashelipilot
    I'm rebuilding the engine on my '69 2002 with 121 head. I found these on eBay. Mahle 082 09 01 (1st over, 89.265). Wondering if these would work with a similar compression ratio to the stock flat tops I currently have. Also, can I re-use the wrist pins from my current pistons as these don't include them, just rings. Thanks guys.
  21. vegashelipilot
    I'm rebuilding the engine on my '69 2002 with 121 head. I found these on eBay. Mahle 082 09 01 (1st over, 89.265). Wondering if these would work with a similar compression ratio to the stock flat tops I currently have. Also, can I re-use the wrist pins from my current pistons as these don't include them, just rings. Thanks guys.
  22. vegashelipilot
    Seeking an E12 stamped cylinder head, just the casting is fine. I'm in Las Vegas. Will pay for shipping.
  23. vegashelipilot
    Looking for a hood (I have a '69 2002 that was in a fender-bender). I'm in Las Vegas but traveling to Phoenix tomorrow. If you're within driving distance of Vegas please reach out. Also need a starter, grilles, among other parts. Thanks!
  24. vegashelipilot
    I like the light tint. Just enough to cut down on some heat but not too much to hide that beautiful interior.
  25. vegashelipilot

    My '91 318i

    image7.jpeg

×
×
  • Create New...