RJT79

Hello,

 looking to sell my 74 tii in Fjorde Blue.  Haven’t had it for too long, but during my ownership, the car had a few upgrades to give it a better driving experience.  All work done to the car during my ownership, I have receipts to validate it, and all done by reputable shops.  
 

vin 2781725

mileage ~ 70k (to my knowledge, with these cars you never really know the true mileage since the odometer just rolls over again once it hit 6 digits.  All original glass in good condition, crack free dash.  Already had the 5 speed (non dog leg) box.  
 

What I’ve done to it:

All fluid flushed and replaced

New battery
New radiator and fan

Replaced timing belt

Spark plugs

Rebuilt the suspension:

Had both front, rear subframe strut housing fully stripped, epoxy primed and powdercoated.  Replaced all bushings, springs shocks, IE sways front and rear.  Reinforced engine mount.  
Rebuilt the rear diff:

Upgraded to a 3.91 20% lock rear diff and stripped and powder coated.  All parts and work was done by Dave Varco.  
Reupholstered and upgraded to Recaros front seats.  Still have original stock front seats if the new owner would like to have it.
Replaced front door panels.  

Replaced e21 basketweave wheels

If it's just a cosmetically desirable thing, can't you just get a FUYAO glass, and have some stickers made to have the original logo put on?  I'm sure the FUYAO logo can probably be removed by some delicate hands.  

Order 13926, please make sure you’re including the rubber nozzles that was mentioned.

As a side note, did this part come from factory paint matched to rest of the car or was it left in this chrome finish.  On my car it’s paint matched 

Please PM me, I'm interested. 

The last time I inquired about recover costs from Just Dashes, it seems like their prices have come down a bit since the pandemic days(they quoted me like $4k and a waiting list of 2 years), now it's closer to around $2k and turnaround time of around 2 months.  Judging by what Vintage dashes sells their dashes made for Datsons and Porsches, the price of the 2002 should be in line at around $1500, which really isn't bad at all compared to recovering it.  

can these be used as fog lights?

PM me Jason

Thank you!!

I’m about to have this printed, can someone that still has this on their driver’s door, what’s the width and height of this sticker?  
 

Everything post I’ve found on this forum points to 35411102054 being the correct number.  Haven’t seen anyone mentioning 3541161723 being the right part and doesn’t even pull up anything on rogerstii, Blunttech or W&N with that number.  

The problem is that Blunttech and W&N also advertise theirs as 35411102054.  Is it supposed to be a different PN? 

So this is what I got from ECS, everything leads me to believe they have the right part shipped to me, but it’s very different than the one that came off my tii.  

So it seems that part 35414440120 is actually the correct part and is NLA?  Looks like I can only find a URO made one, anyone tried it?

Hey all, needed a new gas pedal because it kept popping off on my tii.  Ordered what I found was the correct PN from Realoem, from ECS which never had any problems with any of their orders.  But what my car currently has is the one on the left, but the new one on the right is clearly different.  The new base of the pedal on the new one has a different angle on the bottom so it doesn’t connect onto the steel nugs on the floor.  35411102054 is what I ordered.  

Thank you all, but I’m pretty sure the seller has the wrong p/n. 

12 minutes ago, Son of Marty said:

For some reason that one says coupe to me maybe e9?

That makes sense, so looks like the seller has the wrong P/N listed for it.  

Thanks, I know what a typical late model ash tray looks like, I'm just asking about the one I included picture of.  Will that one fit in the late model console as well?

Hello,

can somebody please help me confirm if this is compatible NOS ash tray for a late model center console?  It definitely looks different than all the ones I’ve seen including the one that is in my car now.  My current one looks ok when it’s closed, but when I open it it’s got quite of bit of rust and needs to be restored cosmetically.  This one that the seller is selling has the correct P/N I’ve found on real oem, but the face plate/handle looks to be completely chrome or anodized finish.  All of the other ones I’ve seen have a black plastic face plate with a silver handle.  Is the seller mistaking this ash tray with the correct P/N?  Thanks.
 

That’s fine, I think I can sand down the worn part and spray it with some green spray paint.  How much you want for it?  
 

Ray

Sure, and thank you.  As long it's just a switch cover.  The previous owner of my car installed a E9 fog light switch cover in that trim panel and drilled out that trim plate that holds the dummy switch and hazard switch bigger to fit the fog light switch.  I've since found a NOS trim plate, and don't want to drill into it to fit the E9 fog light switch.  From the outside they appear to be the same except the center button is orange, but you can see that hole is too big.  

Ray

Is this still available?

Hey I’m redoing my center console, and am looking for one of these dummy cover.  Part  6131135336, if anyone has one please let me know

Looking for the same as well.  I know of a guy in Riverside, CA called World Class Restorations, but he works in very low volumes, which is good, but he takes on whole car jobs over little patch jobs here and there when he's opened up some.  If you found someone good, please send him my way too.  

World Upholstery also advertised reproduction seals as well, anyone tried theirs?