Jvaz
-
Posts
43 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Articles
BMW 2002 and BMW Neue Klasse Wheels
Colors
Steering Wheels
Production Years
Models
Registry
BMW 2002 Vendors and Shops
BMW 2002 Books
The Hack Mechanic
Forums
Blogs
Gallery
Events
Store
Books
Community Map
Videos Directory
Everything posted by Jvaz
-
Hello guys As part of my 2002 project, I’m doing a 5 speed Getrag 245 conversion, also I’m trying to fit an AC system. I might have to slightly modified the transmission tunnel to fit the AC( flattening a bit of the top at the beginning of the tunnel). with the stock tranny the tunnel modification will not be an issue, my question and concern is the Getrag 245 same size at the bell housing as the stock tranny? I don’t want to run into fitting issues after modifying the tunnel and is time to fit the new tranny. Thank you JV
-
Very funny i almost started searching the forum
-
I know but dose anyone here has experience with it? any reviews from other members? i did search but couldn’t find reviews on it.
-
I think you are correct
-
Has anyone here used this AC unit? http://www.dtechparts.com/bmw-2002-heat-and-ac-evaporator-new-redesigned-as-modern-car/ thank you jV
-
But MIke why will be a buzzer connected to the turn signal switch?
-
Hello guys I just replaced the Turn signal switch on my 1973 2002, and everything is working fine. but I notice that the new switch is a little different, I was told that this is the newer switch. the old switch has a black cable that goes to a part under the dashboard. my question is, what is the part under the dashboard? And do I need to remove the black cable and add it to the new switch? here is a picture of my old switch and a picture of the part in question thanks JV
-
Thanks for the advice
-
Hello im considering adding an oil pressure and temperature gauges, I was looking for an adapter to put on the Distributor in the stock location. I found one made by Parker Performace but I think he is out of business. is there another source for this type of adapters? thank you jV
-
I just did a search, looks like a common problem. thanks
-
So is this normal thing to happen? It makes sense, I did not touch it earlier since I was in my way out to dinner, but you are right it is oil. thanks JV
-
Hello guys I’m afraid, my car has a coolant leak somewhere on the exhaust manifold. the car does not overheat it actually runs smooth and on the cooler side. I did notice some white smoke coming from the front of the exhaust manifold yesterday and the coolant level is a little low. I notice this after the engine was cool. any ideas of what and where the problems is? BTW last month had a compression test and it was good. Thanks JV
-
Awesome thank you again JV
-
Great! thank you so much now, do you know if I need to remove the vent to install the cap, or I can install it like is? is the also a cap for the other edge of the door?
-
Hello guys I’m new to the forum but being following for a while. I got a 1973 2002 couple months ago, in very good condition. the car was restored several years ago. iI have notice a gap on the door where the window vent meets the edge of the door, I have search the forum but have not find if this is normal. so my question is, is this gap normal? If not is it that the window vents need to be adjusted or I’m missing a part like a rubber cap? thank you here is a picture of my 02 and pictures of the gaps in question
-
Hello dose anyone knows member R.M.W? I bought a pair of seats about 2 months ago, and at the beginning we had great communication. but I have not being able to reach him in 2 weeks. I hope he is fine. thanks Johnny
-
R.M.W can you please contact me. JV
