Jahan

The system is in almost new condition with very little use. It is hard to find custom fabricated housing & evaporator. I will take Best Offer.

Thanks

Jahan

Complete AC system by I.C.E. Inc. installed by Korman when the car was totally restored back in 2001 . System came with  warranty ( see photo).  Bought the car in 2008 & removed the AC system to upgrade to TI specs with  big Alum. radiator,  electric cooling fan & auxiliary gauges. AC worked very well before I removed it. Can not found the compresor bracket.  includes, hoses, evaporator, custom housing, drier, condenser, fan,  Japanese made compressor, relays & switches as shown $1,475 Plus shipping.

I have a set of very nice BBS gold 14" if you are interested.

Hi: I have a pair of almost brand new 45s that I bought from topend less than a year ago. They were used less than 200 miles and are in excellent condition. I paid $450 each. I can sell them  for $750 plus shipping.

Thanks

Jahan 

A pair of almost new Weber 40 DCOE ( Made in Spain ) excellent condition.Less than 1000 miles used.

$575 plus shipping.

Almost new Weber 38/38 DEGAS with ported & polished Cannon Manifold in excellent condition including the throttle rod. $395 plus shipping

In excellent condition. Bought from Bavarian Autosport back in July 2008 for $499.95. Car has been driven less than 2000 miles since then. Asking $325 plus shipping.

I am replacing my old Branch Stub with a clean one that I found but it does not have the connection to the intake manifold. Is it ok to delete the hose and cap the hole on the intake manifold?

do you need the manifold also?

do you need the manifold also?

I have two used linkages that are good for parts if you want to rebuild the linkage. mohandesij@gmail.com

Jahan

I have a very nice and newly ported & polished intake manifold from a 1974 2002. This works with all downdraft crabs.

Jahan

I have a very nice and newly ported & polished intake manifold from a 1974 2002. This works with all downdraft crabs.

Jahan

Thank you. I just switched from a 38/38 downdraft to 2 4oDCOE side drafts with a korman one piece narrow manifold. I had the booster & master cylinder out. When I put everything back, The booster is not woking. I put a new check valve also. My mechanic is telling me it is because of the small manifold! I am going to ask him to check the Vacuums reading at the outlet of the manifold.

Does anybody know what vacuum reading is required from the intake manifold for proper operation of the booster

Have you find the AC system?

Jahan

Hi:

I have a set of 4 basket weave BBS gold, 14" with BMW logo center caps in good condition. I can send you pictures. Where will it be shipped to?

Thanks

Jahan

HI;

I think. I have one. Let me check and I can contact you with a picture

JAM

HI;

I think. I have one. Let me check and I can contact you with a picture

JAM

you are correct and know what you are talking about. the shop had the tube in there upside down so the short end was sticking out. I followed your instructions and now the long end is out of the pump and the tube is not loose in there.

Thanks a lot to you and the o2faq

Jahan

I started the car (74 BMW 2002 ) after an engine rebuild and almost a year of restoration. It started right up with the two new weber 40's. After 2 minutes, a lot of oil gushed out. Stopped the engine. The oil filter rubber gasket was blown out. Took the oil filter out, refitted the gasket , put it back and put oil in the engine. Started the car same thing happened. What are the possible causes. Please help.

Thanks.

Jahan

I need you email.

mohnadesij@gmail.com

Thanks

I just need the shift surround portion.Thanks

It is for a 1974 BMW 2002. Also, the console I need is the small one around the shifter. The main long console which sits under the dash is OK.

WTB padded shift console and wiper assembly. mohandesij@gmail.com