Jump to content

B10er

Solex
  • Posts

    16
  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by B10er

  1. Hi,

    I'm looking for a set of 12 10x80mm bolts & nuts that connect the rear differential with each side shaft. Does anyone have these/know where to get em?

    Most are 10x70, but the hole in the side plates of the differential are not threaded, so I need bolts that are longer to go through them and get attached by nuts behind. This is for a 73 Bav...

    Any help would be fantastic!

  2. Hi,

    I have a 73 Bav with that fairly common golden-brown (forgot the actual name) vinyl interior.

    Is any new seat material available? In particular the smooth un-textured outer area - I alreadyhave old replacement basketweave seat material for the inner area.

    Any tips/vendors would be much appreciated.

    Thanks,

    Chris

  3. Hi,

    I'm looking for a Brake Pressure Regulator for my e3. It's the same bit for most or all e3s & e9 coupes - 34344750020.

    Its located towards the rear of the car, with one main brake line in, and two lines out - one to each rear caliper.

    Used/Re-built/New Stock!

    I'm in Canada, but have a mailing address in the USA.

    Thanks,

    Chris

    ctrevelyan@telus.net

  4. Hi,

    I own a 73 Bavaria. Recently I noticed a small hairline crack (3 inches or so) on the centre floor of my trunk.

    My understanding is that this is a stress fracture caused an old rubber differential mount, and is a common design flaw in these cars. I'm not all that familiar with e9s, but I've seen neglected Bavarias/e3 where the entire trunk is split by a crack of over a foot long.

    My understanding is that the repair is (1) the removal of the rear diff., (2)weld up the hiarline crack, and (3) weld in a reinforcement plate in the effected area for many years of future happy motoring.

    Has anyone had experience with this/has comments to offer/can point me in the direction of information about this? If all goes well, she'll be going under the knife this month...

    Thanks!

    Chris

  5. Hi,

    I hope its ok to post a quick e3 question on here...!

    My pads all around are 20+ years old (and in suprisingly good condition) so from other e3/e9 former or current owners, but nothing last forever...any recommended performance upgrades for pads (specific brands)? rotors? Easy upgrades from newer models (e12 etc...)

    Any help at all would be great!

    Take Care,

    Chris

  6. Hi G-Man,

    Thanks very much for the offer - I just love steelies, but your's are not the ones I'm after! I'm after the earlier generation style. Should I need e12 era steelies in the future, I'll be sure to look you up and hope you still have em'!

    Thanks,

    Chris

×
×
  • Create New...