boldtu

All of the parts are in Irwindale CA which is about 15 mins east of Pasadena

Chet

The chain and guide are both brand new, although only the chain is in the box

I am located in Irwindale CA

Chet

Getting a new car so most of my 2002 parts need to go

1. 320 5-speed (know to be good) $250.00

2. rear drum back plates $15.00 for both (sold)

3. Spartan Horns $10.00

4. Windshield Washer pump (worked two years ago when I took it out) $5.00 (sold)

5. head gaskets

- one time use $20.00

- reusable $35.00

6. fuel line breather container $5.00

7. Brake booster housing $20.00

8. bottom engine mount bracket $10.00 (sold)

9. Ireland throttle connection for 38/38 $10.00

10. tii brake master cylinder newly powder coated $150.00

11. wiper blade assembly BOSCH $10.00

12. Cam Chain Guide $10.00

13. Steering member $15.00

14. Cam Chain NIB $20.00

15. Cam Sprocket 10.00

16. Newly rebuilt 1976 head with Schrick 289 cam $250.00 (sold

17. Weber Carb worked when I removed it but I am sure it could use a rebuild or at least a clean up $20.00

18. ball joints, clamps in position with good rubber $10.00 pair (sold)

19. Stock intake manifold not hogged $20.00

20. set of four rare British 2002 wheels, I started polishing these but never finished, they have been blasted with fine glass and are in pretty good shape

$75.00 (sold)

21. Stock air cleaner $25.00(sold)

Redline Carb to manifold gasket set $7.00

battery stand surface rust only $10.00

Engine Block with piano top pistons, ran well when disassembled $150.00

I am flexible on pricing, if you need something shipped I can do that if you pay the shipping and packaging charges

I can media blast any of these parts for you if you would like for a reasonable fee

Here is a link to the pictures of all the parts in addition to my 2002 which I am selling as well

http://picasaweb.google.com/113702182197519532175/1971BMW2002#

THANKS!

Chet

the head is sold

the intake and Weber is still available

chet

both head gaskets are NIB or plastic bag more like

Thanks

Chet

throttle linkage is gone

head is gone

wheels are gone

Thanks,

Chet

sold

Ok if you want me to mail you a part just email me your address. when I see the funds in my paypal including their fee I will ship you the part. again my personal email is boldtu@gmail.com or you can call me at 626-592-0517

I am available most of time and will get your part shipped out asap

All of the parts are located in Irwindale CA near Pasadena

The parts on the white roundie are going with the car and have been sold with the car

all other parts are still still available although some are scheduled to be seen

if you would like to buy anything you can give me a call at 626-592-0517

Thanks,

Chet

the seats are not for sale

the throttle connecting rod is yours

are you local to Irwindale CA?

Chet

if you bought the reusable one I would throw in the manifold gasket for free

Chet

Getting a new car so most of my 2002 parts need to go

1. 320 5-speed (know to be good) $250.00

2. rear drum back plates $15.00 for both

3. Spartan Horns $10.00

4. Windshield Washer pump (worked two years ago when I took it out) $5.00

5. head gaskets

- one time use $20.00

- reusable $35.00

6. fuel line breather container $5.00

7. Brake booster housing $20.00

8. bottom engine mount bracket $10.00

9. Ireland throttle connection for 38/38 $10.00

10. tii brake master cylinder newly powder coated $150.00

11. wiper blade assembly BOSCH $10.00

12. Cam Chain Guide $10.00

13. Steering member $15.00

14. Cam Chain NIB $20.00

15. Cam Sprocket 10.00

16. Newly rebuilt 1976 head with Schrick 289 cam $250.00

17. Weber Carb worked when I removed it but I am sure it could use a rebuild or at least a clean up $20.00

18. ball joints, clamps in position with good rubber $10.00 pair

19. Stock intake manifold not hogged $20.00

20. set of four rare British 2002 wheels, I started polishing these but never finished, they have been blasted with fine glass and are in pretty good shape

$75.00

21. Stock air cleaner $25.00

Redline Carb to manifold gasket set $7.00

battery stand surface rust only $10.00

I am flexible on pricing, if you need something shipped I can do that if you pay the shipping and packaging charges

I can media blast any of these parts for you if you would like for a reasonable fee

Here is a link to the pictures of all the parts in addition to my 2002 which I am selling as well

http://picasaweb.google.com/113702182197519532175/1971BMW2002#

THANKS!

Chet

I am parting ways with my 2002. I bought this car two years ago with the intention of making a lightly modified street car out of it. However my father and I are restoring a 911 at the same time and we need space to finish that. The car was stock when I got it, but we added many performance parts. The engine runs very strong with a 38/38 Weber, Ireland exhaust, and a 320 radiator. I have driven this car from Vegas to San Francisco in the middle of the summer and the temp gauge did not pass 50%. The car comes with Recaro seats and a new carpet kit. The gauge cluster was just restored and the interior painted white so you wont be driving by candlelight. The suspension has been rebuilt with powdercoated components, Eibach sport springs, and Bilstein Sport shocks and struts. The car handles very well. The tires have about 80% left on them with steel wheels (I have the hub caps as well). The car does have some body damage to the rear where it was hit two years ago. I have taken her to World Class 1600. (http://www.worldclass1600.com/) I was quoted $5,000 to paint and do all the bodywork, PPG with clear coat. I have taken off the side trim plus the front and rear reflectors and welded the holes. The car comes with a four speed but I have a good five speed that is ready to go in that I am willing to sell with the car. I also have a newly rebuilt large port 1976 head with a Schrik 289 cam that I am willing to sell with the car. The car drives great and is ready to be made into your dream. It is located in Irwindale CA in a climate controlled garage. I am asking $2,500 but I am flexible. I have many more pics and would be happy to send them. The ones I took are too big for FAQ so if you need pics please email me here or at boldtu@gmail.com. I will take some pics that are smaller and post them ASAP. If you have any questions please don't hesitate to ask. Thanks for looking

ok here is a pleace where you can view pictures, thanks again

http://picasaweb.google.com/113702182197519532175/1971BMW2002#

Thanks guys, at this point it is between the M10 and a cosworth. We will need to see which one pans out. Thanks again for all of your help

Chet

Thanks guys that makes me feel more confident. at this point it is between the 2002 motor and a cosworth. Thanks for all the good info

Chet

Have any of you guys heard of putting an 02 motor in a Lotus 7. I have an extra motor, and a friend recently let me drive his 7, I was blown away.

Thanks,

Chet

The cars they build now may not look too much like our cars, but they are a blast to drive. Even an X5 feels tight. I am not a fan of many of the new car"s styling but the experience is still unique to a BMW

ars=arms

thanks again,

chet

I took my wiper blade ars off to polish them. I let them sit after I blasted them for about a week and the passenger side got a little rusty. I thought they were both aluminum. The drivers side (with the little wing thing) is not turning color at all.

any thoughts

Chet

I have a few for sale, with an addition from last time

A Weber single barrel carb (34 ICH), worked great on my 71'

will work now, but could a use a rebuild at some point. $15

2002 radiator from my 71', worked great when I had it on the car about six months ago. $15.00

Stock intake manifold (not hogged), replaced it with a redline. I blasted it with fine glass bead, its in good shape.$25.00

top engine mount metal piece. I bought this from 2002 AD, unfortunately they charged me $25, I blasted it with fine glass bead and repainted. $5.00

all of the parts are in Irwindale CA, I can ship if you would like for a little extra

I am willing to negotiate on the prices

thanks for looking

Dont know if you are in Los Angeles but if you need help welding up the holes I can give you a hand

I dont think it looks awkward at all

I can send you pics but my bondo job isn't the greatest in the world so I dont now if mine is the most convincing.

Take a look at some 1600s and that will give you an idea

I like the cleaner look

I also put a little RTV on the seem between the glass and enclosure. cuts down on vibration according to http://www.my2002tii.com/

worked great for me

I also put a little RTV on the seem between the glass and enclosure. cuts down on vibration according to http://www.my2002tii.com/

worked great for me