Black2002
-
Posts
44 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Articles
BMW 2002 and BMW Neue Klasse Wheels
Colors
Steering Wheels
Production Years
Models
Registry
BMW 2002 Vendors and Shops
BMW 2002 Books
The Hack Mechanic
Forums
Blogs
Gallery
Events
Store
Books
Community Map
Videos Directory
Posts posted by Black2002
-
-
Looking for good - excellent sunroof cable passenger (Rt) side.
-
Thanks for the thoughts. Hubs up fromt are stock so it sounds like my job is to increase my collection of washer for. a studied fit.
I haven't selected tires....still riding on 13's, can't decide between performance or classic (painfully expensive) look....Michelins.
Regardless, looking forward to a new look.
-
Can anyone with direct experience provide any insight?
Math sez: I need a 19mm spacer and then I need new press in studs, but how long?
The RZ have the cover so a conical bolt???
Thoughts?
Fitment guide consulted but not the above combined specifics.
TIA
-
Knurled and pressed in like wheel studs?
Thanks. It is rusted and was frozen to the rear suspension bushing.
Removal was a cut and burn situation.
Deciding to de-rust in place or go new.
But thanks for the heads up
-
The "Pin" x2 located in the interior in front of the wheel arch which holds the Rear Suspension; How do you remove it?
I did a quick hit on the bottom, thinking it would pop up but not hard enough to damage threads.
It didn't move or look like it wanted to.
On the inside it looks like it's held with seam sealer.
Anyone with suggestions from experience?
Search of rear suspension ............no one seems to specifically mention it's replacement.
Thoughts??
-
Mike:
Isn't this you: 604 716 7581 ??
I was messaged by that number requesting my email, yesterday. I responded immediately.
Regardless,
again:
Bill Leatherman
312 Puritan Rd.
West Palm Beach, Florida 33405
M: 617 953 0079
email: wllemail@aol.com
-
Hello Mike:
Thanks for the inclusion.
My contact information and shipping address.
Bill Leatherman
312 Puritan Rd
West Palm Beach, Florida
33405
M:617 953 0079
I'll pay with PayPal when requested....please provide your email.
-
Joysterm:
Did I not express my interest in these correctly?
I seem to have submitted before the requested deadline.
The response to me was three question marks.
I don't understand how to interpret three question marks.
I wanted to express I am interested in an ordering one set, even though I understand that the maker is not building to the number ordered. (I gotta wonder about that!)
You would put me on a waiting list and if enough people drop out, I could be contacted and would need to supply funds within 48hours.
Hence: I am willing to making "a cash commitment."
Thnx is a contraction for Thank You, In this case, a thank you in advance to adding me to the list.
Sorry, for any confusion in my brevity of language.
Bill ( my name)
-
Cash commitment, here.
Thnx, Bill
-
Hi Looking for part number 31111115970.
What it looks like>>>>
I believe only on '75 -'76
Thanks in Advance
-
Hello: I'm glad to template this area for you, my gas tank is out.
But, have you tried Restoration Design inc. for actual sheet metal????
He's a great guy and should be able to help if you phone.
-
Hello All:
Authenticity issue brings me to the forum for original ....late model .....'76 Battery Terminal
and starter wire. Please provide photos for consideration............TIA
Bill L
-
Thanks All:
Looking at the repair manual and you can just barely make it out in the photo, did you notice the wires are marked 1 - 2 -3 - 4?
How cool is that?
Toby: Checked your suggestion through Summit Racing. I see where you're going.
Interested in vintage chic, though.
Anyone happen to know the. factory lengths of each wire ???
(crazy trivia ! )
-
Will some one explain the pre '74 spark plug wires compared to '75-'76 spark plug wires.
It seems all to do with the distributor cap? Regardless of innie or outie notches isn't the DIN size the same?
Does it have to do w/ resistance in the wires?
ReAssembling engine...geeking out on "old" style "Beanie Cap Plugs" with no right angles coming from the distributor to(brown straight) spark plug connector.
Like shown.
I believe these were originally Bosch wire sets.
I could be foolish enough to see if Magnecor race wires could recreate.
Or can I still find these and they would fit on a '76?
-
Looking for yellow wire handle M10 Dipstick.
This is for a '76 .......two tube rubber hose set up.
Thanks for looking!
Bill L
-
Looking for Dipstick - Yellow Handle
Selling yours?
Thanks
Bill L
-
All: I'm looking for confirmation on routing of coolant lines to Weber 32/36.
The illustration shows which two nipples I believe I should be using.
Does it make a difference on which one is in/out for the Weber? (i.e. Top or Bottom?)
Am I missing anything? ( Just couldn't find a plumbing diagram ....)
All Help is appreciated.
'76 49 States C
-
Lots of Parts Sale 1976
in Miscellaneous
Posted
Looking for sunroof cable R and headrest metal in good condition...........not interested in fabrik.