building a differential...guide, pics if possible

[Guest Anonymous]

Need to get some info in rebuilding a differential. I am going to make a 4.10 LSD. Was told I can make up a 4.10 lsd from a 320is slip disk and ring & pinon from the 4.10.

Blown up inside images would help.

Thanks

[Guest Anonymous]

I do have some pictures of mine when i was rebuilding it/modify it...i did increase the lock-up from 25 to 70%.

send me a mail with specific info you need.

Pat

[Guest Anonymous]

(nt)

[Guest Anonymous]

This crush washer determines the torque applied to the front bearing. It is crucial to get it right.

Clutch discs are not available from the dealer, but Jim Blanton or Maximillian have them. They are inexpensive and allow you to increase the slip factor. You will need 2 extra discs and bevel washers.