-
Posts
11 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Articles
BMW 2002 and BMW Neue Klasse Wheels
Colors
Steering Wheels
Production Years
Models
Registry
BMW 2002 Vendors and Shops
BMW 2002 Books
The Hack Mechanic
Forums
Blogs
Gallery
Events
Store
Books
Community Map
Videos Directory
Posts posted by Christian von Breymann
-
-
On 8/20/2021 at 12:43 AM, Jim Blaschke said:
Still available?
-
On 8/27/2021 at 2:38 PM, benh said:
Hi Joseph,
The only blue fabric I still have the first one pictured, it's more like a velour than than a corduroy. Let me know if you want some close up photos.
Hello. I need a full set of fabric (2 Recaro front seats + fabric for back seats) and foam, if possible.
Anything available? If not, any idea where I can source this?
Thanks in advance for your response.
-
Hello! do you still have this available?
-
14 minutes ago, 2002iii said:
15x7 ET22-25 is the preferred setup.
Have you had the inner fender lips rolled?
Not yet. I was hoping to get away with the 37mm spring pad, and keep the fenders intact. But fender lip rolling seems to be step 2...
-
the offset is 12ET
-
? Glad you enjoyed your visit!!
Yeap, I will get some photos to show where they rub.
I think I with the Eibach springs and the 28mm pad was a bit to much lowering.
-
Hello. I restoring a '73 roundie. I bought 15" Alpina style wheels (staggered 6" front, 7"rear).
The rear wheels are rubbing against the wheel well. I kind of suspected this might happen.
Question here is: I got the 28mm upper ring pad. If I use the 37mm pad, will the problem be solved?
Anyone with a similar experience ?
Warm regards from Costa Rica!!
Christian
-
Ok. Thanks for your input. I'll keep you posted on the results!!
-
Hello!! Im finishing the restoration of my '73 2002.
I rebuild the engine, upgraded with Weber 40 DCOE, a 302 cam from Ireland Engineering...a very nice setup, BUT when I started the engine, I've found some issues. I have an Ireland Engineering tii mechanical distributor with the electronic igniter, a Bosch blue coil, MSD 8mm cables and NGK BP5ES spark plugs. The problem is it starts fine, runs good for a couple of minutes, and when it heats up, it starts misfiring and eventually, I get no spark...
Anyone with a similar experience and, hopefully a solution??
Thanks in advance for your help!!IMG_2278.HEICIMG_2275.HEICIMG_2276.HEIC
Chris
-
Hello. Are the seats still available?
Please let me know.
Rgds,
CvB
Headlight Buckets
in Miscellaneous
Posted
Are the headlight buckets still available?