Rami88

On 9/4/2023 at 5:08 PM, Georges said:

Rami,

 

If you used a S2000 tranny do you think it would solve the drag link problem?

I believe that would work better, at least going off of manimals posted cad, however since I already had the G260 and adapter I figured I'd try try the drop link mod first.

Hi All, I've been working on this swap as well but only found this thread recently. I'm using the Kpower oilpan, adapter plate, and G260 transmission with a 04-06 K24A2. I didn't have scanned models when I started my build but ran into a lot of the same issues highlighted by the cad model done by manimal. Lessons learned so far:

1. Kpower pan fits, but its clearance is a bit tight.
2. The OEM battery tray has to go.
3. The waterpump thermostat housing interferes with the oem steering box motor mount
4. I removed the oem subframe side motor mount

The current issue I have run into is that the center steering drag link interferes with the adapter plate right where the transmission needs to go. I am thinking of looking into making a custom  u shape center link that puts the drag link in front of the adapter plate. The E12 center drag link has a similar type of design. Hope this helps anyone else working on this swap.

 

Parts taken, hoping they will find a way back into an 02 in some way or another!

10 minutes ago, Dabliz02 said:

I would like the head that’s not on the engine if you’re willing to ship on my dime.  If not then I’d hate to see it tossed.  

Unfortunately I don't have the time at the moment to ship.

I am giving away an M10, trans, and spare head that were pulled from my 2002. The head currently on the engine is not in usable condition and the bottom block is in unknown condition. The trans is also in unknown condition. I am offering them for free here with the hopes that someone in the 2002 community can use them. They will be scrapped by the shop if not picked up by next week. Must take all parts. I'll update this listing when they are gone. Please do not disturb the techs at the shop, rather talk to the shop manager Andre.

Parts are currently at Importmotorworx in Lawndale :
4623 Artesia Blvd, Suite 2
Lawndale, CA 90260 .

Shop Number: 310 370 2299 (8am - 5 pm PST)

Hi everyone, I am clearing out some parts I have saved over the years for an M10 turbo build. I am looking to sell locally and am located in Southern California close to Torrance. Parts are available until the 26th or when sold! I also have some flat top OEM pistons I can include if wanted. 400 OBO.

1. Older megasquirt (I think v1 or V2.2) and wiring tail

2. Older Innovate LC1 wideband controller kit

3. TD05H -14b Turbo it was sold to me as working, but I do not know its condition

4. 2.5" diameter aluminized mild steel tubing (3 tubes)

5. 304 stainless steel weld els

6. Mild Steel M10 exhaust flanges

7. 2 intercoolers - one from a Saab, the other from ebay

8. Treadstone performance silicone couplers and clamps

9. DSM blow off valve