Tom Johnson

they are white . The trim piece does not touch the door 

DOOR CLIPS :I have rep;aced the clips that hold the lower trim to the door . 

The trim piece does notfit flus to the door because the clip is larger (wider) than the old one . I bought the clips from Roger`s tii quite a while ago . I am wondering if anyone else has had this problem and if they have found a different clip or a solution to the challenge

I returned mine .It did seem short and was virtually imossible to slide in either direction past the intermediate point

Hi , I purchased a new door stop OEM and am having trouble . The dorr does not want to move past the intermediate position after installation . The door will not open or close . Is it possible that the part is defective ? It is the new replacement part 

I am wondering if anyone has a source for the hoses that come off the back of a kugel fischer fuel pump for a 73 tii.

Looking for a temperature time switch . Please reply here

On 7/5/2020 at 4:05 PM, JsnPpp said:

Price: $245

Location: Austin, Texas

Description:

**** Update November 2020 ****

 

Hi Folks, I sold the last of my extra boards from the first batch, thanks to everyone! I'll gather parts for a second batch. If you have a need just reach out. 

 

~Jason

 

~Hi Jason I am interested in one of your new circuit boards ASAP . I have just installed a rebuilt injection pump and have found that the relay is not working. Do yo have an idea of when you might have more of these available ? Thanks Tom ~~

 

Hi,

 

I have parts to build several cold start relay circuit boards designed to fit aluminum case cold start relay Bosch PN: 0335 330 001 and Bosch PN: 0335 330 003. This circuit board does not fit the black plastic case Bosch PN: F026 T00 001.

 

These cold start relays can be found in BMW 2002tii, BMW 2002 turbo and early BMW 520i cars. The repro boards are a custom PCB with high quality, properly rated components and a custom spade connector design that is stronger than original. I build each by hand, which takes multiple phases; daughterboard and spade connectors + passive components. Then two rounds of testing (the final is actual installation in my tii). The goal is for the boards to be strong, work as originally designed and last another 50 years.

If interested in a board, shoot me a message. The price includes shipping within the continental US (with tracking number). I take paypal. Please note that this price is the circuit board only, not the aluminum box. You will need to swap the board in your case (I include instructions) but if you wish you can send me your box prior, I can test it and then swap boards and send it all back to you.

 

If you choose to buy a cold start relay, and have a non-working board that you want me to look at, let me know at time of purchase. If it has burned components or lifting solder traces, I can explore repairing it so that you retain the original as backup. No guarantees though; some boards are pretty far gone - this is a case by case basis.

 

Here is my blog in case you wish to learn more (or follow the journey) https://www.bmw2002faq.com/blogs/blog/404-reproducing-the-tii-cold-start-relay/. This also includes troubleshooting, before you buy a new cold start relay make sure your entire system is working as it should.

 

Thank you. Any questions, just ask!

 

~Jason