xrockoutx

Just noticed this for sale in Reno, NV at a local lot

https://www.sierraclassics.com/used/BMW/1969-BMW-2000A-2c8819570a0e09b164ae221e6a42bbfa.htm?ref=craigslist

https://longisland.craigslist.org/ctd/d/reno-1969-bmw-2000a-for/7694757701.html

Vintage black/blue Corbeau GTS reclining seats (two/drivers/passenger, a pair) with Corbeau Sliders for BMW 2002. I had them mounted in a 76' but never drove it, previous owner said they were in a Pantera that also wasn't driven. They will need a quick vacuum as I've had them covered in storage for a while. Thought I'd get my 71' Atlantik back and that these would be perfect in them....but you should buy them instead 🤷

(only one seat pictured, but they are both for sale and of similar condition...I got lazy)

Located in 89434 (Sparks, NV)

Beautiful! Good luck with the sale...hopefully I'll see it around town before it moves away.

Amazing! 

If anyone has one of these little guys just sitting around not doing anything...I wouldn't be opposed to buying it? Not looking to break the bank though ?‍♂️

Vermont plates in not-Vermont typically mean registration sans title (or at least that's how I've registered my "classics").

So I had a 76' tii project, that ended up having a dead cylinder...and I sold it, so my parts stash does me no good. The IE distributor was never mounted/used, the 123 was used to start the car 10 times or so, and the euro signals are as they arrived from Europe. All items located in Sparks, NV 89434. ?

123 distributor: $450 shipped (continental US)

IE tii mechanical advance distributor: $150 shipped (continental US)

SOLD - euro signals (amber): $150 shipped (continental US) - SOLD

I received all the parts I ordered, and they reached out to me on one that wasn't in stock anymore (this is in the last 2 months). ?

I'll take those at $150 shipped! PM me your payment info (tried to PM you, but it wouldn't let me). Thanks!

I just picked up a 76' and will be in Santa Cruz this Saturday ?. I've got a ROUGH pedal box...honestly probably too rough to be worth a damn. I'll send you a picture later today if you want?

Just sent you a message

They are for an m10, but if your motor is stock (stock carb, stock cam, stock exhaust) I am not sure how they will ultimately function (or perform)...however if you've got a weber 32/36, some sort of exhaust, then I'm sure they're just fine. Performance upgrade and all ?...worst case scenario they make all sorts of rad noise, and you've still got a 98 hp m10.

Hey Beantown! I didn't get a notification on this...super sorry about that. They will definitely fit on a stock 2002, not sure if the size is slightly too large for a completely stock m10 or not.

Used (never installed on my car) Stahl Header, painted in VHT header silica paint (that hasn't been heat cycled...since I never put them on), has a repair on the 3rd runner (or 2nd?)...measurements are in the pictures, read them and weep!....buy this bad dawg and let those horses rip!! $250 obo+shipping (I don't know what that runs at the moment, but I'll box them up and find out ASAP), or pick it up?! Even better! ? Help fund my non-BMW cars...or maybe I'll buy parts for my 1 Series?

I've got a passenger e21 Recaro for sale! Left bolster cover has some damage, missing the latches for the seat release mechanism (cable appears to not be attached as well). Comes on e21 sliders (one side is way shorter than the other). Tried to mount this in a non-BMW, but it just wasn't working. Make me an offer, and this lovely passenger seat could be yours!!

Reno, NV https://reno.craigslist.org/cto/d/1969-bmw-1600-project-car/6560103590.html

PM'd.  I'd be interested in that 71, 4 speed, 32/36, stock intake, and the sidedraft manifold...price depending of course.

I'm in need of a pedal box+pedals if it gets parted

I'm over here digging through every couch I can find...but coming up broke.  Good price and definitely something I'd be all over if $3,000 drops into my lap.

Price:: 2700

Location: : RENO NV

1990 BMW E34 525i 5 speed manual built stroked M20 Bronzeitbiege

$2700 obo open to reasonable trades..

Originally I bought this thinking I'd put it in my 1971 BMW 2002, but there's never enough hours in the week to get to something like this, so it's just been hanging out doing NOTHING. I thought going fast in a super small old car would be the best thing ever, but let's face it...I love driving like your grandparents. My complete lack of speed is your chance to upgrade your E30/E34/EXX...you know you need a turbo charged inline 6 BMW motor, we all do.

It has recently come to my attention that tacos are really good. If you like tacos as much as I do, then this might be the car for you. It's got 4 doors AND a huge trunk...can you imagine how many tacos you can cram into those spaces? Glove box? Check! Map pockets? You bet! Fill it all with tacos. I've done the math..a taco has a cubic volume of 36 "^3 and an e34 bmw has 27993.6"^3, that means you can cram 778 tacos in there! Why won't you Live Mas?

Clean NV title! Car is sold as is and would honestly make a better donor to put the engine in an E30...because we all love E30's, but it runs, drives, stops...it does it all! Power windows? It's got them! Radio? Yup! Seats? Sure thing!

Parts list:

BMW m20 2.7 built by Castro Motorsport North Hollywood CA (http://www.castromotorsport.com/)

build consisted of all parts to build a new 2.7 short block

-Main bearings, rod bearings, ARP main bolts, ARP rod bolts, ARP head studs. Parts and labor total to - $3700

-m20b25 Cometic MLS head gasket - $218

-TCD (Turbo Charging Dynamics) stage 1 clutch kit - $449

-Stainless steel exhaust/intake valves, Heavy duty race rock arms, Rocker shaft, 272 Cam (new), Adjustable cam gear - Ireland Engineering - $1060

-MegaSquirt 2 ECU w/ Goathumper adapter board - $400-ish

-Wasted spark ignition system

-CXRacing manifold, Super 60 internal wastegate turbo

-Front mount intercooler

-Innovate LC-1 wideband controller - $160

-Magical fairy dust - $Priceless

^{I'd love to get those black front door cards, but not sure what shipping to 89434 would be, or if it's worth your time to do it.  Let me know though!}

Price drop $3100 AS IS.  Runs and drives, though rear brakes need some work.  Located in Sparks, NV 89434.

Price:: 3500

Location: : Sparks, NV

1990 BMW E34 525i 5 speed manual built M20 Bronzeitbiege

Originally I bought this thinking I'd put it in my 1971 BMW 2002, but there's never enough hours in the week to get to something like this, so it's just been hanging out doing NOTHING. I thought going fast in a super small old car would be the best thing ever, but let's face it...I love driving like your grandparents. My complete lack of speed is your chance to upgrade your E30/E34/EXX...you know you need a turbo charged inline 6 BMW motor, we all do.

Currently I do not have a title, it's from CA, so you could do a bonded title. I will be trying to get a title in September, so for now this is being sold AS IS for parts...because the drive train is the only part that is beyond awesome, the shell is basically a giant boat of a car...put this in your e30 (change that oil pan).

Parts list:

BMW m20 2.7 built by Castro Motorsport North Hollywood CA (http://www.castromotorsport.com/)

build consisted of all parts to build a new 2.7 short block

-Main bearings, rod bearings, ARP main bolts, ARP rod bolts, ARP head studs. Parts and labor total to - $3700

-m20b25 Cometic MLS head gasket - $218

-TCD (Turbo Charging Dynamics) stage 1 clutch kit - $449

-Stainless steel exhaust/intake valves, Heavy duty race rock arms, Rocker shaft, 272 Cam (new), Adjustable cam gear - Ireland Engineering - $1060

-MegaSquirt 2 ECU w/ Goathumper adapter board - $400-ish

-Wasted spark ignition system

-CXRacing manifold, Super 60 internal wastegate turbo

-Front mount intercooler

-Innovate LC-1 wideband controller - $160

Looking forward to this!  Not sure if I can make Friday, but Saturday and Sunday for sure.

-Ian

I realize everyone's already seen this, but put me in line too if others all end up backing out.